Jump to content

New Watch And New Project

dbals

By dbals
in Your Watch Collection

 Share

Recommended Posts

dbals WRT Addict

dbals

Posted
Posted

So excited,

 

Hamilton Khaki King Automatic on my wrist and the new project is a Swiss Army Vitorinox  Automatic.

 

 

 

So far loving the Hamilton- the look, feel and accuracy are wonderful, still haven't told the wifey :startle: .  It's also a night and day difference working on old Russian and cheapo HMT's from ebay to this automatic.  Turning out to be a real pleasure.

 

 

Dan B.

post-174-0-21471000-1402412031_thumb.jpg

post-174-0-66268700-1402412034_thumb.jpg

post-174-0-57341900-1402412037_thumb.jpg

post-174-0-45453000-1402412040_thumb.jpg

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

That's a couple of nice watches you have there Dan. The Hamilton is a classy item, are you going to refinish the case?

I look forward to hearing how you get on servicing the Swiss Army watch!

Link to comment
Share on other sites
dbals WRT Addict

dbals

Posted
  • Author
Posted

Outside of a little buffing..... no.    Putting it on the timegrapher really sealed the deal, still can't help but keep glancing at the Hamilton on my wrist all day. 

 

The Swiss Army has a ETA #2836-2.  So far a pure joy to strip down, would of finished last night but my young son woke up (scared of thunder and lightening).  I only get a chance to tinker after everyone gets to bed so its usually after 9 pm.  Been trying my best to take photos along the way but always get too involved, at least I have the tech manual.

 

 

 

  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...
bobm12 Distinguished Member

bobm12

Posted
Posted

Hi dbals, although a little late, I wish you the best with the project...or maybe it is finished? Did you restore the swiss army dial? How did you do it? Soap and water, baby oil, what was the recipe?. It looks so shiny and ...like new!

 

I see you are from the big city... I'm myself from the northwest suburbs but I've been living down south, in Florida, for some time now.

Link to comment
Share on other sites
dbals WRT Addict

dbals

Posted
  • Author
Posted (edited)

Done......

 

The only thing I did with the dial was use rodico to remove some dust.  I keep forgeting to take more pictures but I am getting better.    

 

Oh no, Cubs fan?

 

Daniel

Edited by dbals
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Bonefixer
      7750 chronograph service

      By Bonefixer · Posted

      I’ve been working on a 7750 with some success - so far not broken or lost anything and have the base movement up and running well. I’ve reassembled the chronograph mechanism and I have a problem with the minute recording. The finger on the centre wheel is at the wrong angle - it hits the minute driving wheel and the watch stops, unless I give a little nudge and then it carries on.    The tech sheet says to check for 0.02mm clearance (figure B) which I haven’t got. Can I adjust the finger on the chrono wheel, or should I get a replacement? Is there anything else to consider?
    • Terrinecold
      Timegrapher noob questions

      By Terrinecold · Posted

      Thanks for the clear explanation.  
    • VWatchie
      Rolex cal. 3135 issues

      By VWatchie · Posted

      Yesterday a Rolex cal. 3135 landed in my hands housed in a Rolex Oyster Perpetual Date reference 15200. Having analysed its running (fully wound) using @praezis excellent PCTM software, nothing is alarming or acute, nevertheless, my conclusion is that it's up for and could benefit from a service. I'd like to know if someone has a different opinion. Pictures to follow... However, what is alarming is that the rotor is loose, and unfortunately, I think it's pretty bad as the rotor won't even oscillate when the watch is in a dial-down position and gently shaken.  It also makes an unpleasant metallic sound when the rotor is spinning, so I hope it hasn't caused too much damage. Unfortunately, I have not been able to confirm this visually as I do not have the correct tool to open the case back and do not want to take chances with my JAXA opener. No doubt a repair is needed, and if a repair is done a service should of course be done as well. I guess I just answered my question 🤨 After reading this thread started by @dibs1, I guess that the rotor axle is worn out and needs to be replaced. dibs1, you mention that you replaced it "using the proper staking punch". It would be interesting if you (or someone else!) could tell us a bit more about how that operation is done. I also read somewhere that "There is a brass 'bearing' or similar, in the movement that wears out and starts to leave brass shavings in the surrounding around". I have no doubt that I would be able to carry out a service but I feel a little unsure about how advanced the rotor repair is and what tools are required. So any handy tips would be greatly appreciated!
    • RichardHarris123
      Hello from Montreal

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Amadis
      Hello from Montreal

      By Amadis · Posted

      Hello, I am French and Canadian, based in Montreal for 11 years now. I am a watch addict, specially vintage watches or watches with an history. I have always been fascinated by the ingenuity of watch movements and I have decided recently to learn more about them by taking Mark's courses on watchfix.com I will certainly learn a lot from you all, I am therefore looking forward to participating in this forum.
×
×
  • Create New...