pocket watch crystal

[Ducati2242]

I have just finished overhauling a Goliath pocket watch . I dont have a crystal for it and didn't expect it to be difficult to get until I started looking that is. Problem is it is 62mm dia it is flat and quite thin probably 1.2 to 1.5mm . Can't find one anywhere . Anyone have any ideas .

[Blacklab]

This any good: ebay item no. 371419840347 one or two others on there as well.

[oldhippy]

A Goliath pocket watch glass should be thick because it is classed as an open face. Getting one of the correct size is about as rear as rocking horse ****

[Ducati2242]

30 minutes ago, Blacklab said:

This any good: ebay item no. 371419840347 one or two others on there as well.

i tried this number but it says 0 listings.

[Ducati2242]

3 minutes ago, oldhippy said:

A Goliath pocket watch glass should be thick because it is classed as an open face. Getting one of the correct size is about as rear as rocking horse ****

Should it be flat . I thought it would be thin as there isn't much of a recess to install it .It is open face though . I have hundreds of crystals but unfortunately the biggest I have  61 mm

[clockboy]

I serviced & repaired hands on  Goliath last year. I remember searching the web (as you do) and did find a Goliath Crystal on the Ebay so they do appear now and again.

[Ducati2242]

48 minutes ago, Blacklab said:

This any good: ebay item no. 371419840347 one or two others on there as well.

found it thanks. Bought a couple . May not be correct but better than nothing until the correct one turns up.

Edited May 2, 2016 by Ducati2242

[oldhippy]

The glass would be quite flat.