Jump to content

Rotary case back

chrisdt
 Share

Recommended Posts

chrisdt WRT Addict

chrisdt

Posted
Posted

Can someone help with this please....Is this a screw back? If it is the pins would be very thin. If snap on

no prize points for case knife visible. Thanks

P1010018.JPG

P1010017.JPG

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

  • Topics

  • Posts

    • HPS
      Ebosa 65 confusion

      By HPS · Posted

      Hello. I wanted to follow up with a few more pics in case it makes sense to anyone. The first image with the tweezers shows where the seconds wheel passes through. This is the only part that will move when wind the watch. This tube is fixed to the plate and is not movable. I can put the cannon pinion in here and it will engage with the barrel wheel directly. Putting the dial side wheels in order still gives me no idea how the minute and hour hands are supposed to move as the only direct contact is still that wheel that is part of the barrel wheel. Any help would be appreciated. 
    • Stoller5
      Rado DiaStar 129.0266.3 electronics Help

      By Stoller5 · Posted

      Hi everyone, Not sure if you can assist, but here goes. I am trying to replace a few parts on my father's Rado DiaStar: 129.0266.3The crystal gasket over time has softened and melted inside the case/crystal. Additionally, when I removed the movement one of the electric contacts came off. In the attached image, the small gold fingers is what I am referring to. The electronics and movement are beside it. Where in the movement does it go? Additionally, I would like to find a set of replacement gaskets for the case/crystal and case back. can you assist with that?
    • HectorLooi
      Slava 2414 clamps screws

      By HectorLooi · Posted

      It's a disease. After you get the donor, you'll want to repair that too.
    • Simeon
      Starter quartz for service?

      By Simeon · Posted

      Ha! Definitely not profit. It's more than I appreciate the intricacies and want to challenge myself with something different.  Good idea, you always see lots of quartz watches. It's a cheap way to enter the lottery and maybe find something good. 
    • ColChibani
      Slava 2414 clamps screws

      By ColChibani · Posted

      Actually, I finally did both. I bought a digital caliper that measured 0.9 mm for the screws. And I bought a spare movement, without case, but with both clamps & screws. It will arrive in a few weeks. And, when searching for these screws, I found exactly the same russian watch I am trying to repair, in good condition, and for a bargain price (see photo). I bought it as well, but I will repair the other one anyway. The travel is the journey ! I keep going ...
×
×
  • Create New...