Jump to content

Vintage Cartier Santos?

Lily
 Share

Recommended Posts

Lily New Member

Lily

Posted
Posted

I recently got this watch "Santos de Cartier" but not sure if it's authentic. I looked online and found a similar style called Cartier Santos Demoiselle but not 100% sure. I used a magnifying glass and saw that there's a "Cartier" word hidden at X or 10 on the watch face. The watch clasp has the word Cartier on it. There's a few diamonds missing at the front and I checked that they're not real diamonds. Any insights would be appreciated so I can learn more about this brand. Thank you!

 

IMG_5859.thumb.jpg.1f4875811b52f5d71dd05c0905fb4705.jpg

 I 

IMG_5858.jpg

IMG_5855.jpg

AndyGSi Distinguished Member

AndyGSi

Posted
Posted (edited)

Welcome to the forum.

I'm sorry but I think the fact it say sanlosde Cartier on the back means it's a fake.

The other points are it's a Quartz and the quality isn't their.

Edit

Just realised I'd not completed the statement, the fact that it's quartz we'd need to see the movement.

Edited by AndyGSi

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • docrpm
      Elgin Grade 315: Runs/stops with dial down/up

      By docrpm · Posted

      Yep…This makes perfect sense. With that large a gap in the serial numbers, they were almost certainly machined on different equipment, hence one should have no expectation of any cross-batch compatibility. I’ll revert to the original bridge. Regarding bending the bridge @nevenbekriev, I’ll give it a try, but I may have to buy some better calipers. My Vernier calipers are only accurate to 0.1mm. Not very accurate. 
    • nevenbekriev
      Elgin Grade 315: Runs/stops with dial down/up

      By nevenbekriev · Posted

      Yes, what I wanted to say is that the cock is part of the main plate, manufactured together with it and not meant to be interchangeable. Even if the other cock gets in place, it is not sure that the balance then will stay upright. You should use the original cock when it exists and is not destroyed. The adjustment needed by bending it is not irreversible. It is minimal deforming that is needed. No tools are needed. I have pointed to all needed references here for the balance staff endshake checking and correctness confirmation. The only tool needed for the correction is You thumb. The cock must be fixed on the main plate, no need of special plate with holes and so on. If You will feel more confident, then measure with Vernier caliper the height of the top of the cock where the stones are against the main plate bottom when the shim is fitted and try to reach the same height when bending the cock (with no balance in place!!!) Caliper with screw for fixing is perfect.    
    • LMS
      Thermal Bluing Issue

      By LMS · Posted

      Thanks for the reply. I polished the head of the screw using 1500 to 10000 lapping paper and a screw polisher. This is why I think the head blued and the rest of the screw didn't. Silly question, how do you polish the whole screw inc threads, if that's what it needs to blue? 100% clean, Elna red and heated ultrasonic bath + IPA rinse. Finally, there is definitely heat leak as there's about a 30c difference between the brass bed and the soldering station temp. Having said that, the bed temp was stable. I will try to search out a better brass pot, but I haven't found one yet, hence the stainless steel bowl. 
    • RichardHarris123
      Removing stem from compressor-style case

      By RichardHarris123 · Posted

      Agreed but that's where WD40 excels, water displacement. 
    • tomh207
      Thermal Bluing Issue

      By tomh207 · Posted

      I would change the container to a thick walled brass one to start with. Looking at you screw pictures they don’t look shiny enough, really it’s best to do a black polish on them before trying. Also make sure once polished they are scrupulously clean, I dunk my experiments in acetone before bluing.   i think the thin walled stainless container to leach away the heat from the shavings, most successful bluing videos for example use thick walled brass to hold a good deep amount of shavings which acts as a better holder of heat.   Tom
×
×
  • Create New...