Jump to content

Recommended Posts

Posted

Hello community.

I recently stopped by a small clock store in Europe and had a great chat with the man and owner. 

I saw he had a vintage Leonidas and he opened it for me, I cant remember but I believe he said it was a Landeron 151 caliber running this beautiful time piece. He also said hes had it for more than a year.

Price tag atm is 1450 Euros, might be able to bring it down , glass could also be replaced. When I look up the same watch with black dial ( one I found has Landeron 248) in it was for sale for over 3500Euros. I am reading about the difference between movement but it seemed to me that 1450 euros could be a good price? taking in account it would need a service since movement seems a little dirty.

Pusher, chrono works and snaps right back in position. 

Wanted to know your thoughts? If some connaisseur can spot if it is indeed the Landeron 151 in it.

 

18k Gold case. 35mm

I have been wanting a vintage chrono in gold for several years now. Like Angelus Chronodato black dial but the price tag is much higher.

 

Here are a few photos of the watch in question. Would love nayones input, if I missed something and if there is anything I could learn. 

 

cheers 

f34ff5aa-8ccf-4eea-be02-f0b41f792e78.thumb.JPG.f7907cc0613c1ca07110fe6e1439d605.JPG9eec0e82-6a77-4cb7-aab1-bf59c22c63c6.thumb.JPG.e64f7082573f0f58ca5eaae6567f4e13.JPG6fd52335-d950-467e-879f-4df5ed1417e0.thumb.JPG.f6c2fe784e5bb5aa87099acb51df3acb.JPG

 

Actually might be a Landeron 49 from zooming under the balance wheel 

He also had a nice Zenith but I forgot to check what movement was in it. 8841daf8-4874-436d-857c-7ee01c3fc6eb.thumb.JPG.df895ff05c069c0ec5575d035be66b2e.JPG

Posted

 Did you notice ,  some letters of LEONIDAS  on dial plate look refreshened,  poor dial paint overall, as we say healthy but ugly bride.🤣

Lets examine the Zenith.

Regs

 

 

 

 

 

 

Posted

The case 

2 hours ago, Klassiker said:

Did you see the caseback and the hallmarks on it and the case?

Yeah I remember seeing 18k but can’t remember if it was 18k 750 ( I believe so) or GP/GF. I’ll stop by again. 

 

2 hours ago, Klassiker said:

The movement looks like an L48, not a 151, and definitely not a 49.

Hummm.. hard for me to tell the difference. I have a L48 home and I remember when he said which one it was I was surprised because it was different. Zooming in the photo I see a 4 but it’s more difficult to see the other number. You seem quite sure so I am inclined to def trust you . He might have made a mistake. Poor guy he’s gonna have to see me a 3rd time lol
 

I appreciate your time offering your input. 

22 minutes ago, Nucejoe said:

Did you notice ,  some letters of LEONIDAS  on dial plate look refreshened,  poor dial paint overall, as we say healthy but ugly bride.🤣

Lets examine the Zenith.

Haha I am not sure if it’s the angle and the light but it’s possible. Man I asked him and he grabbed his what seemed like to be a very old neon green loupe and looked at the dial. I have my loupe in my pocket but didn’t take the time to inspect… since I haven’t found ANY dials or subdials similar to that I am inclined to agree with you.. that’s what I dreaded. 

2 hours ago, Klassiker said:

Did you s

 

2 hours ago, Klassiker said:

Did you see the caseback and the hallmarks on it and the case?

Could it also be possible that a 18k gold caseback was put on a gold plated case? Let’s say the dial is not original , then the possibility of having the  “wrong caseback” could be possible

Posted
6 hours ago, Arigato said:

You seem quite sure

I'm only going on the pictures I found online (e.g. Calibercorner and Rannft websites). The L49 is a column-wheel movement, so definitely not that. Maybe something ending in 49? How that is relevant wrt. the price you were offered, no idea. Check eBay, Chrono 24 etc. for comparisons.

6 hours ago, Arigato said:

Could it also be possible that a 18k gold caseback was put on a gold plated case?

It's possible, but then he's being dishonest. If he's describing the case as gold, then he will be able to show you the hallmarks.

If you're not sure, walk away and do more research.

Posted

I forgot about Ranfft. That’s a great source. Thank you for your time trying to help out!  I’ll just go again and this time look at everything. Since the dial seems repainted, he said it’s original but doesn’t mean it’s not repainted.

some leonidas on chrono and sold 3k euros + if solid 18k/original dial . If played worth under 800euros hence my question in finding more. 
 

cheers 

 

Posted
18 hours ago, Arigato said:

Hello community.

I recently stopped by a small clock store in Europe and had a great chat with the man and owner. 

I saw he had a vintage Leonidas and he opened it for me, I cant remember but I believe he said it was a Landeron 151 caliber running this beautiful time piece. He also said hes had it for more than a year.

Price tag atm is 1450 Euros, might be able to bring it down , glass could also be replaced. When I look up the same watch with black dial ( one I found has Landeron 248) in it was for sale for over 3500Euros. I am reading about the difference between movement but it seemed to me that 1450 euros could be a good price? taking in account it would need a service since movement seems a little dirty.

Pusher, chrono works and snaps right back in position. 

Wanted to know your thoughts? If some connaisseur can spot if it is indeed the Landeron 151 in it.

 

18k Gold case. 35mm

I have been wanting a vintage chrono in gold for several years now. Like Angelus Chronodato black dial but the price tag is much higher.

 

Here are a few photos of the watch in question. Would love nayones input, if I missed something and if there is anything I could learn. 

 

cheers 

f34ff5aa-8ccf-4eea-be02-f0b41f792e78.thumb.JPG.f7907cc0613c1ca07110fe6e1439d605.JPG9eec0e82-6a77-4cb7-aab1-bf59c22c63c6.thumb.JPG.e64f7082573f0f58ca5eaae6567f4e13.JPG6fd52335-d950-467e-879f-4df5ed1417e0.thumb.JPG.f6c2fe784e5bb5aa87099acb51df3acb.JPG

 

Actually might be a Landeron 49 from zooming under the balance wheel 

He also had a nice Zenith but I forgot to check what movement was in it. 8841daf8-4874-436d-857c-7ee01c3fc6eb.thumb.JPG.df895ff05c069c0ec5575d035be66b2e.JPG

That sounds like an incredible find, especially with the charm of discovering it in a small European clock shop. The Leonidas with a Landeron 151 at €1450 seems like a fair deal, especially if the chrono functions well and resets properly. A service would be a given, considering the dirt in the movement, but that’s expected with vintage pieces.

Comparing it to the black-dialed version with a Landeron 248 at €3500, the price discrepancy could be due to dial rarity, condition, or collector demand. The Landeron 151 is an earlier cam-switching chronograph movement, whereas the 248 is a later evolution—both solid but with slight differences in feel and history.

If you can confirm the caliber and negotiate a bit, it might be a worthy addition, especially if you’re comfortable with a light restoration. Did you happen to take any pictures of the movement to confirm the reference?

Posted

On the upper right lug when looking at rhe movement I see brass plate wear. An original dial hands and movement might be worth that asking but if he says solid gold and it's plate, that reason alone to say no.

  • Like 2
Posted
11 hours ago, AndyGSi said:

Looking at the back and the condition of the pusher I'd be dubious about it even being gold plated.

Thank you for your input ! I think ill pass. 

21 hours ago, Razz said:

On the upper right lug when looking at rhe movement I see brass plate wear. An original dial hands and movement might be worth that asking but if he says solid gold and it's plate, that reason alone to say no.

Thank you for your input as well!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Sorry I have this thread forgotten. Now, why the stones break? Several reasons: One - the old stones are crunchy. Be careful! Two - wrong tweezers. Use brass ones. Three - wrong approach. The best way is not to grasp the stone close to working side. Grasp it for the middle part, the tweezers direction to be perpendicular to the stone. Use oscillating tilting movements when moving the stone.  Now several tips that are not read from the books, but found in my practice. They are good for my way of correcting pallet stones position: You don't need the heater for adjusting the stones position. The heater will be needed only to glue/fix the stone when the adjustment is already done.  The stone should seat tight enough in the slot without gluing. Tight enough so the movement will work normally and thus checking if the adjustment is correct is to be done before gluing. If the stone is loose in the slot, then heating and melting the shellac will make the stone move in by the capillary force. So, if the stone is loose in the slot, then find out if the stone is not correct or the slot is opened. If the slot is opened, then (in steel pallet forks) it is good idea to anneal locally only the small part that forms the slot before trying to close the slot. Also, put in the slot something slightly thinner than the pallet to limit the amount of bending If the stone must go out, the shellac can stay in place, it will not make the adjustment harder. Just bend the stone to break the bond between the shellac and stone. Then heating only will glue the stone again if the shellac is not old and degraded. If the stone must go in, then the shellac mus be removed from the slot bottom as to make space for the stone to go in. I often use pallet stones from USSR Slava alarm clock for pocket watches repair. Slava pallet stones are usually bigger (wider) than needed) and I grind/lap them to correct size for the slot. Grinding is of the side that never contacts the EW teeth. It is enough to put the stone on the lapping plate, pres on it with finger and move it forward/reverse several times while pressing, then check in the slot.  
    • I used a small ultrasonic for years until it died, but it does need to be large enough to fit jars in to hold your parts, and small parts ideally are in mesh baskets within the jars so you are not fishing them out one by one with tweezers. So the one you linked might be too small and this kind of thing really the minimum workable size
    • You'll probably find when you get the dial it's slightly under the stated size to start with. Depending on the dial I'd mount it on a mandrel then spin it in a drill using a hard sanding pad to reduce the diameter.
    • Thank you @AndyGSi for the heads up. It is supposed to pressed down by a metal ring/bezel. I haven’t tried it yet. Let me check. Alternatively I may reduce the diameter of the dial, but I would need to mask/protect its face from dirt.
×
×
  • Create New...