Jump to content

New toy - a vintage G Boley lathe

rjenkinsgb
 Share

Recommended Posts

rjenkinsgb WRT Addict

rjenkinsgb

Posted
Posted

Just got this yesterday, a G Boley bevelled bed type in pieces.

The plating is starting to wear through in places, but it is generally quite clean and after adjusting and oiling the headstock bearings, they seem to still be in perfect condition. Pretty good for being around 100 years old??

I got a faceplate with it, and one collet. There is no centre in the tailstock, just the tubular clamp. The tailstock bore seems to be around 6.6mm ?

I need to either find or make a cross slide or rest for it. 

The only bits that are missing are some of the brass washers from the clamping screws, and the pin for the indexing arm - both easy to fix.

I am curious about the collets. A lot are advertised as "6mm", however the parallel section on these is actually 6.5mm; is the 6mm the thread size, or are they a different standard?

 

IMG_4060.thumb.jpg.2d6ea21a2d45c2c3c0580344fe8568fb.jpg

 

IMG_4061.thumb.jpg.84fa72b6c0342637153602519661b595.jpg

 

IMG_4062.thumb.jpg.ebcf51908487a21d6eefcd44ac24624d.jpg

 

IMG_4065.thumb.jpg.b3f30392de623402d2ec4a011796b8a5.jpg

  • Like 1
tomh207 Distinguished Member

tomh207

Posted
Posted

In my research Rob there 3 main collet sizes for this style of lathe as well as the dbar Geneva style.  6, 6.5 and 8mm. 6 & 6.5 are no longer made anywhere, some 8mm like WW are still made new. 6mm you see fairly regularly on the bay, 6.5 are much rarer. Hopefully one of our more knowledgeable members will add more.

 

Tom

  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Nucejoe
      Greetings from Whidbey Island.

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Titanium
      Lab Coats

      By Titanium · Posted

      Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Titanium
      Chinese tools debate

      By Titanium · Posted

      Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
    • caseback
      Calendar work certina 25-651

      By caseback · Posted

      I found this string about this problem. I've not gone through it all, but I believe it also mentions making a spring. If not in this string, the info is online.
×
×
  • Create New...