Jump to content

Finished my first pocket watch repair

aitaita
 Share

Recommended Posts

aitaita Member

aitaita

Posted
Posted

Just finished up my first repair attempt on an 1939 Omega 38.5LT1 GSTP watch.

Bought it as a non working watch for $80 Usd and was pretty happy I just had to replace the mainspring with one from a parts watch (Still took 3 hours though)

The barrel had some very rusty looking oil on the arbor, so I cleaned it and the mainplate/bridge pivots with Naptha.

Took me a about 2 hours just to rewind the donor mainspring. my conclusion is the 3D printed winders Aren't the best for pocket watch mainsprings. So I'm going to buy a bergeon winder Since I expect to be working with this calibre quite a bit.

Once I get some proper oils and cleaning fluids I'll go through again and clean everything. And probably replace the crystal once I decide how I'll deal with the lume.

But for now I managed to get a watch to run within 10 sec/day without causing more damage, so I'm perfectly happy with it as is.

IMG20241003175553.jpg

IMG20241003175625.jpg

  • Like 3
aitaita Member

aitaita

Posted
  • Author
Posted

  

19 hours ago, Razz said:

Source a new crystal! That would really make it pop!

17 hours ago, nevenbekriev said:

Be aware that the lume is radioactive. Take adequate measures to avoid inhaling or swallowing  particles of it

Yeah, I noticed the lume when I was buying the watch, I'm gonna wait until I have the supplies to fully service and replace the crystal before I go through and finish the watch.

aitaita Member

aitaita

Posted
  • Author
Posted

I attempted using denture cleaner to hide some of the hairline cracks in the dial, Worked great but also removed all the lume (I knew the risk at least)

Which is great because it now gives me an excuse to try reluming a dial and hands!

 

image.thumb.png.942ea778f6ab335a1623475e4a37401d.png

image.thumb.png.3a1eec44143925673d647a3653332e41.png

  • Like 1
rehajm Super WRT Addict

rehajm

Posted
Posted (edited)

That’s going to be quite attractive when complete. Do you know the calibre size? The movement resembles the classic Omega 30t2 in a larger size…

Edited by rehajm
  • Like 1
aitaita Member

aitaita

Posted
  • Author
Posted (edited)

I just finished my first attempt at servicing the watch.

I'm pleased with the results. I did not expect such a good improvement with the amplitude. Found a crack in the balance bridge jewel which is now also on my list of things to fix.

My oiling skills probably need work, and new oil is now on my endlessly growing shopping list.

 

IMG20241013000833.thumb.jpg.585fd2146c982de4e10838634f5fded4.jpg

Untitled.png.126191abc0c38f24f83003b2f15b566b.pngIMG20241012233542.thumb.jpg.c426d229e74d64d360aef76460bbf325.jpgIMG20241012223304.thumb.jpg.cec45c76cf8f3a81f18a1c64ce176047.jpgezgif-5-ab32f94691.thumb.gif.61492e5e5f92eec0ce2f9d31bc214739.gif

 

 

Edited by aitaita
  • Like 1
  • 2 weeks later...
aitaita Member

aitaita

Posted
  • Author
Posted

New Crystal has been fitted! managed to get the profile and size perfect on the first try.

N Sternkreuz 43.8

placeholder dial while I'm waiting on some lume to be delivered.

IMG20241025195349.thumb.jpg.7853f5d982181bb3e24610959b4312ff.jpg

  • Like 2
aitaita Member

aitaita

Posted
  • Author
Posted (edited)

Four Weeks later, it finally looks finished, Luming the dial went well, the finish is a bit too goldy was hoping for more of a brown.

Looks great compared to how it started though, the hairline cracks in the dial cleaned out well.

Now to find a new watch to work on (Before I decide to have a second go at the lume).

IMG20241031224029.thumb.jpg.44fd45251b81bed8521ee87a1b4719b2.jpgIMG20241031224035.thumb.jpg.c95d18eefc03f7e19fc4913efccc2cd9.jpgbeforeafter.thumb.png.0e4f24c3d01bbc14ee3cf5d4bc5273bc.png

 

Edited by aitaita
  • Like 5

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Nucejoe
      Greetings from Whidbey Island.

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Titanium
      Lab Coats

      By Titanium · Posted

      Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Titanium
      Chinese tools debate

      By Titanium · Posted

      Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
    • caseback
      Calendar work certina 25-651

      By caseback · Posted

      I found this string about this problem. I've not gone through it all, but I believe it also mentions making a spring. If not in this string, the info is online.
×
×
  • Create New...