Jump to content

Weather In Ireland


Recommended Posts

Hi,

   My daughter has just landed in Ireland today on her honeymoon. My wife just told me that in the last two days here we have gotten 5 inches of rain so we were wondering what kind of weather she might be experiencing for the next 5-6 days.

Link to comment
Share on other sites

Hi,

   Thanks for the update Geo. Looks like weather will be fairly nice for the most part. I just asked my wife where in the country they were going to be and neither of us can remember. We remember them talking about visiting some castles and historical sites but we just don't remember. I think their plan was to visit different areas. I guess there's about a 5 hour difference in time zones from here so they may be looking for a local spot to eat about now.

Thanks,

Charles

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks for your most appreciated assessment with this. I will purchase a new movement. 
    • Sorry I am confused by step 4. Which screw? There is the balance cock screw. I don’t think that is what you are talking about. The only other screw I see is on the side of the swan neck regulator. I do t think that is the one you are talking about either Well I managed to make it worse again but I could take pictures.  I had put the balance cock partially in place with one locator pin in. I wanted to remove it and I know I should use my screwdriver in the slot to move it off the pin but I didn’t l pulled wit my tweezers and it stuck then gave suddenly and was thrown a few inches away and of course the hairspring got tangled (a coil was above the cock) and untangling it from the cock deformed it.    I am going to try to put it back in shape and I will likely post more pictures after shortly. I’ll wait for feedback before reattaching it to the cock
    • Hello and welcome from Leeds, England. 
    • OK, bad video... Almost all of them are. To attach the spring (stud) to the cock: 1. Put the cock on the table top upside down.  Open the regulator if closed. 2. Put the balance on , align the stud above the hole for it in the stud carrier. 3. Help the stud to get in the hole by gentle pressing. 4. When it is in, grasp the cock with balance with tweezers (from aside, not from above), then get it between fingers, not changing the horizontal position, then tighten slightly the screw. This is the moment to correct the high position of the stud - it's top must be even with the carrier. Now tighten the screw. 5. If the outer coil is out of the regulator, move the regulator to the max to '+' position, then guide the spring to get in the regulator. Now You can return the regulator where it was and close it above the spring
    • Newly interested in watch servicing & repair.  Just ordered a few basic tools and a cheap Seagull movement to practice on.  I hope this turns out to be a rewarding hobby (intellectually, not financially.  Really not expecting financially 🙂).  Just wanted to say hi and no doubt I'll be back for advice.
×
×
  • Create New...