Jump to content

crystal/gasket interference

Davis
 Share

Recommended Posts

Davis Watch Enthusiast

Davis

Posted
Posted

Installing a new crystal and gasket to a watch. ID of housing is 33.5 mm. The chosen gasket has an OD of 33.5 mm and an ID of 32.5 mm. The original crystal measured at 33.0mm OD. This size yields an interference of 0.5 mm which seems excessive.  Should I select a crystal with a diameter closer to 32.5 mm or say 32.6 mm.

Many videos on installing these items but none show how to size.

Thanks for your comments, Dave

Link to comment
Share on other sites
Davis Watch Enthusiast

Davis

Posted
  • Author
Posted

M,

Thanks for the reply. I thought I watched all the Essinger videos but I missed this one or didn't watch it to the end.

I'll go with the 32.6 diameter crystal.

Thanks again for your help, Dave

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • clockboy
      Need Advice for Armoured Crystal

      By clockboy · Posted

      Personally I would just replace like for like.Or just polish the old crystal and refit.
    • VWatchie
      AS 554 from 1930

      By VWatchie · Posted

      I've also heard it called the "top side" and the dial side the "bottom side", which should make any non-repairer very confused. There are many examples and sometimes it comes down to personal preference. Personally, I like to say "dial train" whereas most other people would use the term "motion works".
    • mikepilk
      Chinese clone demagnetizers

      By mikepilk · Posted

      Is magnetism such a major problem that we (as home hobbyists) need to spend $$$ on a fancy demagnetiser? I use one of the cheap blue Chinese demagnetisers (£10 from ebay). It works, and has never failed to demagnetise a movement, or my screwdrivers. Magnetometer - who needs one?  Take a very small screw. If it sticks to the clean part, it is magnetised 🤣
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      My overall preference is to use traditional names and terms, that became my habit when i was taught joinery by old boy chippies 2 generations older than me , that had their time in the 40's. But what i often do is adjust the names and terms i use according to who I'm talking with. Sometimes i will say trainside and occasionally watchmaker's side. I try to find a balance between accommodating other folk ( there's no point speaking a foreign language to someone who doesn't understand it ) and using a name that appears to me to be more relevant as to its use or description. But using the name lever can be quite confusing,  some watches might have parts that are also levers, release levers, which in effect is what the pallet fork is, an escapement release lever. 
    • mikepilk
      Seiko 6309a diver crown replacement

      By mikepilk · Posted

      Then put the case number in here https://www.cousinsuk.com/category/filter/search-seiko-case-parts and it should give you the crown 
×
×
  • Create New...