Jump to content

How to remove crown/stem for movado platinum


Recommended Posts

Hi, all

I have the very old movado platinum which I bought long time ago which is out of battery. In the past I took shower while wearing the watch. Unfortunately, the steam got inside the watch and messed up the inside of the crystal. I have not used it for a very long long time. Recently I found it in the draw and I try to fix it myself. I already order new battery and I  try to remove the crown and stem, so I can take the whole thing out and clean the inside of the crystal. Does any body know how to remove the crown with the stem? There is a hole right below the stem. Am I supposed to use the small punch to push into that hole (shown with red arrow)movadoquart.thumb.jpg.3086631a4e955b30f8144333ac1a2650.jpg while pulling the crown and stem out? Any advice is greatly appreciated. Thank you in advance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Never seen that but yes very practical Hector 
    • Welcome, Simeon! I'm into Soviet watches too (not the political system, and yes, I am able to make the distinction, unlike some). They offer amazing value for money. I like your "Big Zero" profile image. It's a true classic and I have one of those myself. I noticed that the hands aren't the original. Not that it matters a lot but here's an interesting article about the Big Zero if you haven't already seen it.
    • I was thinking will the gasket stretch at all to match the desired size.  Did i also deduce that the original gasket is thinner (0 .5mm ) than the cousins gasket ( 0.8mm )  could that just be an effect of you measuring the case for the gasket size  H  ?
    • if we look at and understand why steel becomes magnetised and unmagnetised then its possible to work out why some devices are better than others. Simpy it is a parallel alignment of atoms , electrons within a material caused by external magnetic fields. Different magnetic fields cause different alignments and non alignment of atoms. Fields by AC currents are changing atom direction approx 50 times per second ( 50hz ). As a material is drawn away from a demagging device the field is becoming progressively weaker while also changing the material's atom direction having the effect of returning their random directions ( demagnetising ) . To improve on this demagetising effect, try changing the material's orientation as it is drawn away.  Fields caused by DC currents have the most permanent magnetising effect as the currect is flowing one way only. A good demagger would produce random magnet fields and disorientation of the material's atoms.  
    • Welcome to the forum, enjoy.  
×
×
  • Create New...