Jump to content

misaligned Day/Date on Victorinox swiss army automatic watch

erdos
 Share

Recommended Posts

erdos New Member

erdos

Posted
Posted

Greetings!  

My first post here and hope i'm posting at the right place for seeking help.

I have Victorinox Swiss Army automatic watch, was given to me as a gift about a month ago.  it ran fine for several weeks, but then its day/date calendar on 12 and 6 o'clock positions began to become misaligned.  The day indicator stops between two adjacent days and date looks to be not centered as well.  

I believe it's called Ambassador series (model number 249072), and comes with ETA 2834-2 movement,

Not sure what might have caused this, I didn't accidently drop it or knock it on some hard surface,  is this fixable without resorting to a professional repair service?  

one picture shows when i first got it, the other shows its current state

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted (edited)

Can be due to friction  or wear in day/date mech. 

Would it change right ( eventually) or  when hr/min hands are advanced through the crown manually ? 

A clean & lube might/ might not fix it, if didn't , spotting the fault is work of experienced hands. 

Rgds

 

 

 

Edited by Nucejoe
Link to comment
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mbwatch
      Crown and stem size

      By mbwatch · Posted

      Don't stop there, those railroad spade hands want to be polished and re-blued too!
    • MKUltraBlack
      Crown and stem size

      By MKUltraBlack · Posted

      The Wizard did it 👌 I got the case back and went to take the movement out of the old case and broke the balance staff, went to 8 jewelers etc, all told me it would be a £300 service, had an old half watch (ww2 waltham) that I bought to try dial luming and put the balance wheel from that and as soon as I slid it into the palet, without even screwing down the balance plate, it started ticking 🙂 all working now, with balance and case all fine. Gonna get the case plated and re-line the box now. Thanks to everyone for their help and insight. Much appreciated 👌
    • fclass308
      DIY Watch Cleaning Machine: 'Akrid'

      By fclass308 · Posted

      You might be able to make some money off of that.  👍
    • Simeon
      Staking punches

      By Simeon · Posted

      So, finally managed to snag myself a staking set from eBay. It's a vintage Boley and Leinen set and it looks a bit rough - this is OK as I didn't pay a lot of money for it. Some of the punches look like they have been used to drift out truck wheel bearings! Anyway, I am planning on cleaning up the punches (soak in Evaporust followed by chucking them up in my drill and polish with wire wool and oil) plus working on the ends with an oil stone /Emery cloth to debur and tidy up. I will also make a new lid for the box and repaint the 'anvil' (this is the non-functional part of the restoration, purely for beauty 😉). Do staking punches come in a common size? 5mm? If so can I buy replacements / new to pad out and complete my set? I had a look on Cousins and they only sold complete sets, not individual punches so I am guessing that I would need to find odd used punches on eBay rather than being able to buy new replacements.  I haven't received the set yet so can't measure the punches but they look a similar diameter to others.   
    • HectorLooi
      Incabloc Spring Installation

      By HectorLooi · Posted

      The belief that only Chinese clone shock springs and not genuine Incablocs come loose is a myth. I worked on a ladies Omega a few months ago and being a genuine Omega, I was a little cavalier when opening the shock springs. The upper jewel was fine but the spring of the bottom jewel took flight when I swung it open.  There was a little gap between the chaton and the main plate and this was how the spring managed to slip out. Had a real hard time getting it back in, as the gap was so small. So now, regardless of whether it's a clone or genuine Incabloc, I always use a pegwood stick to prevent the spring from getting anywhere near the back of the hinge where it may slip out.
×
×
  • Create New...