Seth Thomas needs a bushing--need bushing size

[LittleWatchShop]

Pivot size is 0.65mm.  I have an 0.5mm bushing (too small) and an 0.7mm bushing (a little big).

I have read up on this topic and it seems like I a bore size about halfway between these two, but they are not made.

Maybe use the 0.6 and ream/smooth it to the desired size?

[oldhippy]

Many of the American clocks are of poor design and the pivot holes are too close to the edge of the plate. Can you upload a photo of what needs re-bushing. If you have a lathe you can always make one.