Jump to content

Illinois Pocket Watch - issues & questions


Recommended Posts

1 hour ago, Neverenoughwatches said:

🖐  Standardisation became a more common practice as wristwatches started to be the norm.

I will probably wish I had looked back at a reference for citing these dates, but I thought wristwatches were at least significantly representational of the overall consumer metric by about 1920, and that the the mass produced automobile was well set by 1910 tops.  How that translates into the "should have beens" in watch making is debunked by the info in John's post here. 

 

51 minutes ago, JohnR725 said:

 

it's always thought of in this country or when the automobile came into existence mass production interchangeable parts. You can look in the parts catalog for watches and it says the parts interchange and typically they don't list the variations.

I was doing a project for someone with 12 size Illinois watches he picked the watch because of sheep because the parts catalog indicated only one set apart snow variations and the watch was made over 30 years??? A perfect example of mass production everything was not the same don't even kid yourself over 30 years things when change it just the parts book didn't show the changes. Even things like the our wheels that were not marked with a serial number will not interchange with another watch kids are slightly different size.

Typically the way the watches were made is there were made in batches and even in the batches there will be variations because the tools will wear slightly it's really not instantly get into making really precise measuring tools and then measure all of this and make sure everything is within production

I was watching a video on YouTube of company making CNC watchmaking equipment and they were showing how the machine is cutting the parts than they can take the parts and go to an optical comparator look at the parts verify their within the specification and if they're not adjust the CNC machine so that they are within specifications now that exist today it did not exist when most of these watches were made

there is one of my favorite Elgin at least was more truthful on the variation of parts a lot of the watch companies because the books were printed at specific times do not necessarily cover all the variations so let's look at balance staffs how many variations could we have for one part number after all the mass-produced they're all the same part number?

You will note that you do get a variation for pivots size because we look at all the groups that I didn't circle their grouped better different by pivots size but look at the first ones the 18 size the early the first watches how many different staffs do we have all with one part number

image.thumb.png.1b5e1737c720752253cf5f77ae6b82b5.png

here let's look at something from the 30s look at the machinery and ask yourself how fast or easy it would it be to upgrade the factory look up big the factory is. My favorite is the machine I think it's making plates how many thousands of parts does it have even to just read school that machine would take how long

so while the watch companies may have pioneered making parts by machinery they still have a lot of hand adjusting even in the video pay attention you'll see the women take apart build do some sort of manipulation with it and they'll try it out even in the 30s are still doing a lot of hand fitting and yet in the video are those automobiles I see in the parking lot.

 

 

 

In addition to the facts recorded and cited here by John, I am thinking that the difference in size between an auto part and a watch part make them incompatible for comparison at all. Just as any minor error in any calculation in any field amplifies over time and distance, perhaps it works in the reserse as well. 

Link to comment
Share on other sites

7 hours ago, Galilea said:

but I thought wristwatches were at least significantly representational of the overall consumer metric by about 1920,

Not as far as i am aware, the first world war period is generally known as the introduction of wristwatches, a more practical and convenient timepiece in battle. Wrist watches up until then were considered as too feminine up until then. I have photos of my great grandfather wearing a pocketwatch in the 40s and 50's. Wristwatches probably more popular with the younger generations around that time. So I'm thinking more like at least 1940s would be when wristwatches started to be seen worn more often.

Link to comment
Share on other sites

1 minute ago, Neverenoughwatches said:

Not as far as i am aware, the first world war period is generally known as the introduction of wristwatches, a more practical and convenient timepiece in battle. Wrist watches up until then were considered as too feminine up until then. I have photos of my great grandfather wearing a pocketwatch in the 40s and 50's. Wristwatches probably more popular with the younger generations around that time. So I'm thinking more like at least 1940s would be when wristwatches started to be seen worn more often.

That's just what I was thinking, that after the first World War would be right, and this is where I need to get clearer. I read at one time that it was 1910 for the first generally available wrist watch, then earlier, and the trench watch / military popularization, etc. It sounds like we are thinking alike.

Except for that I have quite a few very mainstream watches from the 1930s, so.... in the end, it isn't relevant to this conversation, but it surely is interesting. I have a feeling others will help sort my history out though, thanks in advance.

Link to comment
Share on other sites

5 minutes ago, Galilea said:

read at one time that it was 1910 for the first generally available wrist watch, then earlier

I think that was first attempted a few years before that date but never caught on. Not until during the war with soldiers wanting to imitate their officers. And then ex service men after the war retaining their war watches and civilians drawn to military watches for similar reasons. I still think it took a while for pocket watches to filter out, old traditions among older men. Ladies watches i would have to assume more prevalent at the time, thought more of as an item of jewellery, the reason men thought too ladylike. 

Link to comment
Share on other sites

22 minutes ago, Neverenoughwatches said:

I think that was first attempted a few years before that date but never caught on. Not until during the war with soldiers wanting to imitate their officers. And then ex service men after the war retaining their war watches and civilians drawn to military watches for similar reasons. I still think it took a while for pocket watches to filter out, old traditions among older men. Ladies watches i would have to assume more prevalent at the time, thought more of as an item of jewellery, the reason men thought too ladylike. 

Until I get solid data, I am only speculating. About the watch being perceived as too feminine by men, I don't see why or how that would be so, although again, I have not researched it. The reason I question the notion is because if watches were made wearable for the convenience of fighting men, one would think they were perceived as masculine. Horology as a whole seems still to be a male-dominated hobby and possibly profession. In fact, I am not sure it is true, but I was told last week that I am the only female on this forum. 

Then, if male watches popularized the wrist watch, it seems counter-intuitive that the phenomenon would grow to see women's watches explode as jewelry, leaving male wearable watches in the lurch and feminizing the entire class of watch.

Last reason I wonder is because the earliest wrist watch I own is a 1911 Elgin, and it is large, chunky and masculine. In my experience as a collector, Elgins for men have always been bigger than the whatever was offered by the competition. 

Surely this would be easy to research but I cannot do it at present, other priorities. 

Link to comment
Share on other sites

3 minutes ago, Galilea said:

The reason I question the notion is because if watches were made wearable for the convenience of fighting men, one would think they were perceived as masculine.

Exactly and that is how they came to  being worn more often AFTER the war. Those thoughts would have taken a little while to take effect but would eventually spread through the masses to become the norm. Like i said old traditions of wearing a watch on a chain would die hard with the older male population.  I can imagine the generation that didn’t go to war saying " I AM NOT wearing a puffy watch on my wrist, those are for girly women " 🤣

Link to comment
Share on other sites

3 minutes ago, Galilea said:

Until I get solid data, I am only speculating. About the watch being perceived as too feminine by men, I don't see why or how that would be so, although again, I have not researched it. The reason I question the notion is because if watches were made wearable for the convenience of fighting men, one would think they were perceived as masculine. Horology as a whole seems still to be a male-dominated hobby and possibly profession. In fact, I am not sure it is true, but I was told last week that I am the only female on this forum. 

Then, if male watches popularized the wrist watch, it seems counter-intuitive that the phenomenon would grow to see women's watches explode as jewelry, leaving male wearable watches in the lurch and feminizing the entire class of watch.

Last reason I wonder is because the earliest wrist watch I own is a 1911 Elgin, and it is large, chunky and masculine. In my experience as a collector, Elgins for men have always been bigger than the whatever was offered by the competition. 

Surely this would be easy to research but I cannot do it at present, other priorities. 

My limited knowledge on this is ladies watches were either pendant watches or wristlets, mainly because they had no pockets back in the day. The most famous watch said to be the first men’s wristwatch was the Cartier Santos. This was made by Cartier for his friend and early aviation pioneer Santos Dumont when he said it was so inconvenient to use a pocket watch when flying. My understanding of the more common use of the wristwatch is from WW1, that being the difficulty army officers had coping with holding a pistol, whistle and pocket watch all at the same time when coordinating an attack. This is where trench watches first came about, basically a pocket watch with wire loops soldered to the case to allow it to be strapped to the wrist. This caught on with the troops and both officers and other ranks were asking relatives back home to have them put together for them at the watchmaker. This seems to have been thought of as a jolly good idea and so we came to have the wristwatch we have today as the design matured.

 

Tom

Link to comment
Share on other sites

2 hours ago, Galilea said:

Horology as a whole seems still to be a male-dominated hobby and possibly profession. In fact, I am not sure it is true, but I was told last week that I am the only female on this forum. 

I'm not sure that's entirely truthful thing as I know quite a few women in horology.

then one of the problems the message board is secret identities. Can you tell from someone secret identity whether their male or female?

Oh and I believe this is a female yes I know she specializes but I'm sure she has general horology knowledge?

https://komonews.com/news/erics-heroes/antiquarian-horologist-bellow-washington-vashon-engineeer-island-machines-of-genius-silver-swan-clocks-watchmaker-golden-cage-bowes-museum

 

Link to comment
Share on other sites

35 minutes ago, JohnR725 said:

I'm not sure that's entirely truthful thing as I know quite a few women in horology.

then one of the problems the message board is secret identities. Can you tell from someone secret identity whether their male or female?

Oh and I believe this is a female yes I know she specializes but I'm sure she has general horology knowledge?

https://komonews.com/news/erics-heroes/antiquarian-horologist-bellow-washington-vashon-engineeer-island-machines-of-genius-silver-swan-clocks-watchmaker-golden-cage-bowes-museum

 

Thank you for that link, the one maybe to a woman who might know about horology, I shall feature her in my unicorn collection. I hope you can appreciate the humor in that statement.

You cite one link and mention several more females you have known in horology, which I assume represent a tiny percentage of males you have encountered. That ratio qualifies the field as being male dominated. I think you were agreeing with, not disputing my observation, since you are a very bright man.

As far as being the only female here on this forum, I find that hard to believe, but do not know and have no preference. Hidden Identities, past participants and all, I am with you. Perhaps the person who mentioned that was talking about women-who-identified-themselves-as-such and are active in the forums today. 

Thank you, John, and we'll see you here later on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Personally I would salvage the missing screws from some donor movement.  I also bought a random selection of screws "Assortment of Stainless Steel Watch Screws" for next to nothing.  As for using an Alum solution - I had great success with that removing a rusted stem from a stainless steel crown.  The best piece of advice I read on doing that was to keep the solution warm so that the reaction didn't take weeks!  I did it in a couple of hours with the solution in jam jar and the jam jar in a saucepan full of water which I left on an induction hob maintaining about 60C in the Alum solution.
    • I decided that it was time to tackle the piece that I'd set aside as my first project. The subject in question is a Gruen Veri-Thin pocket watch.  It winds and "runs".  On the time grapher, it has reasonable amplitude (240 or so depending on the position), but was loosing close to a minute a day.  The stem also has the annoying tendency to just come out when pulled, which makes it super hard to set the thing.  As with many things this one started sideways and just got more so.  I was able to overcome the mangled "tab" on the back case cover (a well placed, very sharp knife enabled me to get in when I couldn't get a purchase on the mangled tab with a case knife.)   I was then sort of shocked to find that one side of the dial was held down with some sort off tape or adhesive material as someone had broken the dial foot screw on that side and left the broken screw in the mail plate. The loose stem does in fact seem to have been a poorly tightened setting lever screw, but I'm afraid there may still be gremlins in the keyless works.  While I was able to get the stem to stay in by putting everything in the right place and tightening the setting lever screw (before I took it all apart for cleaning and inspection), it just didn't seem to all sit right. The final gremlin showed up when I was taking off the lower cap stones for the balance and escape wheel (yes the Gruen 380 seems to have a cape jewel on the escape wheel).  The balance stone came off fine (but that in fact is the smallest screw I've ever seen.  When I turned the movement around to get the one off the escape wheel setting, I found that the screw head had been mostly sheared off.  After some reading and looking at what I had, I decided to try and tease what was left of the screw out of the hole by nudging what was left with the corner of my smallest screwdriver.  After 20 minutes or so, I was able to get the remains of that screw out. The picture I'm including of the disassembled movement was taken before I got the second cap stone off, so in the picture, it's still attached to the main plate (for those looking carefully, you'll only see the one cap setting in the pic.) Now I'm left with: A broken dial screw inside the main plate that needs to come out A broken cap stone retention screw that I have in my parts tray, but that is strictly useless and needs to be replaced. The need to get another dial foot screw I'm contemplating solving the first problem by soaking the main plate in an alum solution.  I think the main plate is brass and shouldn't be affected, but I have not been able to confirm.  This seems like the easiest option as I can't really access both sides of the screw to use the pricey Bergeon tool (which I don't fancy buying unless I have to.) I have located a couple of donor movements and have questions out about whether or not the include the dial foot screw and prompting for pictures of the dial side so  evaluate the cap stone settings.  I've also found that a supplier in this country does have the cap stone settings, but isn't overly clear about whether the screws are included. Are these the types of things that one can scavenge out of assortments or is it best to just grab one of the donors assuming that they look like they have what I need?  
    • I visited this place last year just before they closed their counter service - amazing shop (filled from floor to ceiling!) and the guy that was working there was really knowledgeable and helpful!. Their website isn't as good as Cousins but I understand that if you fill out the contact form they have stuff that isn't on the site. https://gleave.london/mineral-flat-bottom-domed/
    • As always in this game the answer is “it depends “ because the first one worked out ok doesn’t mean all will. A case could be made in a way that it would not really matter much, sounds like your first example. However a case could also be made so that only a tension armoured crystal could be used. Generally you replace like for like to maintain the integrity of the watch.   Tom
×
×
  • Create New...