Jump to content

I've Just Bought This Clock.

oldhippy

By oldhippy
in All Things Clocks

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

I just grabbed this nice Antique French marble portico clock garniture. It strikes on a bell and its of 8days duration.

What do you think.

post-1154-0-93937300-1438252055.jpg

  • Like 3
  • 2 weeks later...
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

Up date on this clock. I'm sending it back and asking for a full refund. It doesn't work it keeps stopping, so I took the movement out of the case and what a shock, its filthy dirty and needs a good clean, the warning wheel on the strike side has been fitted wrong, barrel teeth on the going side have been broken this I expect is due to a main spring breaking and the teeth have been replaced with steel pins. All the steel from all the wheels has been pitted including the pinions due to previous rusting. The regulating wheels were not engaged. Al in all a big disappointment for me as the case is in very good condition.  :pulling-hair-out:   

oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

That's a bummer, could you not get a partial refund and fix it?

I'm not going to do that, my eyes are not so good and I no longer have my clock making tools or materials all I have are a few screw drivers. I have seen two other clocks that I'm interested in. I'll let the forum know how things go.

  • 4 weeks later...
bobm12 Distinguished Member

bobm12

Posted
Posted

Sorry about your new clock and hoping you find what you are looking for in your other options... Yes, please, keep us posted!

 

Cheers,

 

Bob

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Hello from Ottawa Canada

      By watchweasol · Posted

      Hello and welcome to the forum.  Enjoy
    • AndyGSi
      Make groove Case steel 316L - without lathe

      By AndyGSi · Posted

      You need to be more careful modifying the dial area. How does the bezel/lens fit on the front?
    • zx6rfool
      Sorting through Grandfathers watches

      By zx6rfool · Posted

      Recently inherited a box of my Grandfathers watches, nothing valuable, but some cool and some unique items.  Seiko SQ, my aunt went to Hong Kong in the 80's I believe and picked one up for my Dad and Grandpa. Below are picture, I believe its a 1987 5Y22-8A08. Put a new battery in it and it fired right up! Its probably been a drawer for 20+ years. Looks like he only wore it a few times.   Citizen Quartz 46-9181 with a seven jewel 7961B movement. It had what looked like some moisture damage, and a corroded battery. Swapped it with a 371 but it would only vibrate the second hand. Tried trouble shooting while in the case but eventually ended up pulling the movement out and cleaning with some naphtha and blowing it out and running it on the demagnetizer for a while to free up the movement before cleaning the band and case lightly oiling and reassembling everything. Now its back up and running. Based on the adjustment of the band I believe my Grandmother actually wore this watch, and I made the mistake of telling my wife that. Now its her watch! The most interesting so far is a 72-73 Benrus.  I tried putting a battery in it, but no joy. Ran it on my little tester, no signal from the coil, tried to spin it up. Just the slightest flicker of the second hand. Put some naphtha where I could reach, and tried again to spin it up. Nope. This watch is interesting in that it does not look like the back comes off, there is a window you unscrew to access the battery, a huge SR44. Ordered a crystal puller and will begin disassembly next week.  I was able to find a little bit about this watch though a google image search; BENRUS H010 TECHNIQUARTZ 1972 1st US made Quartz made by Benrus. Using a custom E-block with the step Motor, a power switch and a Moto Chip driven by MotoQ at 32KHz, on modified ETA mechanical movement. https://www.crazywatches.pl/benrus-h010-techniquartz-1972  
    • SAMyMAS
      Make groove Case steel 316L - without lathe

      By SAMyMAS · Posted

      It’s done and the movement feats/aligns perfectly in the case. I stripped off 10mm wide sandpaper and wrapped /sticked it around the pad with double sided tape. I run with 400 grit and finished with 1000 grit. Now I can continue with my build, I’m going to buy a dial and hands. The dial I am considering is a larger diameter 36.5mm than the allotted space 35mm in the case, so I will apply the same ‘technique’ with sandpaper and Dremel/drill. Thank you @RichardHarris123, @AndyGSi and watchrepairtalk community for your help.    
    • AndyGSi
      Looking to try servicing an old movement

      By AndyGSi · Posted

      As you're in the UK I suggest you look at Cousins for screwdriver sets as they've never cause me any problems. The key is the right blade, dressed correctly to suit the screw. https://www.cousinsuk.com/product/cousins-swiss-style-sets-rotating-stands https://www.cousinsuk.com/product/value-screwdriver-sets-wooden-cases https://www.cousinsuk.com/product/cousins-swiss-style-flat-stainless-steel
×
×
  • Create New...