Crown for Miyota 2035 movement

[K8Chappell]

Hi, 

I fitted a Miyota 2035 movement to my watch, but obviously didn’t attach the crown properly as a week or so ago I noticed the crown had fallen off the stem. My question is:

how do I identify the correct crown (are stems a standard diameter?)

how do I make sure the replacement doesn’t come off the stem (Locktite?)

The original crown was a pull/push type.

This is the watch (minus crown):

 

Many thanks in advance - I’ve done a lot of googling with no success!

 

Kate

[RichardHarris123]

No, stems aren't standard sized. Measure the diameter and then Google the correct crown. Loctite works, I usually just hold the stem in a pin vice and tighten by hand but sometimes Loctite is necessary.