HZ2189 Hangzou 2189 help

[8lackie]

I'm trying to put one of these back together again.

I found this thread: 

I need a clue or a diagram of this watch or similar. I have no idea where this piece goes

Thank you!

[KarlvonKoln]

It doesn't look terribly familiar to me, but I have to wonder if it may belong on the dial side.  Could we ask for pics of the other side of the movement also?  

[lexacat]

That's the click. Goes here:

 

For the record these are pretty much a skeletonised clone of a Seiko 7002 or similar.

Here's a 7002 with the click installed for comparison:

You've got to strip back to take off the barrel bridge in order to install it.

[8lackie]

12 hours ago, lexacat said:

That's the click. Goes here:

 

For the record these are pretty much a skeletonised clone of a Seiko 7002 or similar.

Here's a 7002 with the click installed for comparison:

You've got to strip back to take off the barrel bridge in order to install it.

Thank you. That is very helpful. This HZ is a world of trouble. The crown gear doesn't come off, -I know from the 3 stripes it should come off going clockwise. It seems it's only for show.

[watchweasol]

Hi try warming the screw with a soldering iron. Seen them glued in.  Looks like the Seiko sure enough even the magic finger is the same.   7009. 7002. Etc.    download the sheet from cousins document downloads.    Parts/ tech

[lexacat]

I actually have a spare of this movement at home, but I won't be back there for another 10 hours. When I get back I'll try and remember to take a look at that second reduction wheel screw to confirm for you that it's defitely reverse threaded (it definitely should be). 

[lexacat]

Well, the good news is you're not going crazy. The bad news is I don't have time to dig into it, but that second reduction wheel screw just turns infinitely in both directions for me. So it might be held on by a circlip from underneath, or some other form of wizardry?