Jump to content

New to forums

APD

By APD
in Introduce Yourself Here

 Share

Recommended Posts

APD New Member

APD

Posted
Posted

Hello I am obsessed with watch repair and have been relying on donor hit and miss for spare parts. Recently I have been focused on Venus and Landeron movements and am looking for a resource for  v170 and l48  -l51 parts suppliers. I am in need for hair springs to complete a few movements. Can anyone suggest a reliable supplier.

thanks

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi and welcome to the forum. Depending on your location, Cousins UK, Gleave and co, AG Thomas in the uk. Or   Jules Borel,  Otto Frei,  Esslingers, Timesavers in the US.  Balance springs are not usually supplied as spare as each spring is matched to the balance hence the reason we have balance complete spares which are the balance wheel and matched spring fitted. You may be able tp purchase just the springs, I know some members have but they then need vibrating with the balance wheel to match the required Beats per Min. Of the original.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • JonC
      Leaving the forum for a while.

      By JonC · Posted

      Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...