Fitted New Balance Staff & The Impulse Roller Hole Is To Big.

[Legarm]

Nobody answering this as your all probably watching Marks, 2 hour, marathon vid..... :(

 

[Geo]

Hi Kieth, I' assuming it's the hole for the staff and not the hole for the roller that is too big? Next question, how much bigger is it?

[Legarm]

It slides on with no pressure needed, no play side to side. Snug fit but not tight. :(

Sent from my XT1021 using Tapatalk

[Geo]

You could use a small drop of 638 loctite retaining compound applied with an oiler. Once cured fit the hairspring and set in beat by rotating the hairspring on the shaft as required.

[Legarm]

You could use a small drop of 638 loctite retaining compound applied with an oiler. Once cured fit the hairspring and set in beat by rotating the hairspring on the shaft as required.

 

Great Idea..... I shall order some today.... :)

[Legarm]

You could use a small drop of 638 loctite retaining compound applied with an oiler. Once cured fit the hairspring and set in beat by rotating the hairspring on the shaft as required.

 

 

Came today and fitted roller, now back in 1933 Elgin and running nicely............ Thanks Geo...... :)

Edited June 23, 2015 by Legarm

[Geo]

Great stuff Kieth, that's what I like to hear! :)