Compatibility of Bulova movement parts
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
Looks as if some screws have been replaced. The regulator is curved not bent🤣. Look in the BestFit Catalogues on here that I posted ages ago for the I D.
-
By Neverenoughwatches · Posted
Thats a strange phenomenon but yes i can differentiate between non magnetisable and non magnetic thanks mark Thanks for explaining that nev, still seems strange 🙂 -
Both! It’s a Timemaster alarm watch. It has cap jewels over the hole jewels on 3 of the train wheels making 8, 2 on the escapement, 2 on the pallet pivots, and 5 on the balance (including the impulse) making 17. But no pallet stones. And it has a cheap, ‘stamped metal’ sort of bridge/balance cock, an open mainspring barrel, and the alarm spring barrel had a weird arbor/gear hybrid. Not seen that before. It was interesting to figure out how the alarm works, so learning all the time, but this was definitely a cheap one, despite being ‘fully jeweled’.
-
It seems this topic is becoming very interesting 😀. Here are two more pictures that might help to identify the movement. The diameter of the dial side is 40mm, and the other side 36,5mm.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.