Jump to content

Practical practice with tweezers for springs and screws.


Recommended Posts

Hey everyone.

 

I am slowly working through Mark's lessons. In the very beginning, he mentioned something to the effect that when he started, he was told by the shop to practice with tweezers, especially handing springs and screws. I admire Mark's dexterity, the ability to pick up a screw and turn it every which way he needs to. In my newbie journey, I have been pinging them into the horological void as a form of sacrifice to the journey of learning. I know that with practice I should get more competent and lose less screws and springs and other small parts. I also know that a good pair of tweezers and maintaining them is very important.

Can anyone suggest practice exercises I can do with tweezers, springs and screws to get better and more dexterous, more competent?

 Reading up on the forum and learning how to shape lost springs with guitar strings has been a godsend so thank you very much to all Watch repair talk people.

Link to comment
Share on other sites

I bought selections of 100 each of screws, springs and click springs from cousinsuk, cost about £6.00. I have been taking them from their boxes onto the mat, turning them over, picking up and putting them in another dish then reversing the process after doing all 100 of a type. Advantage of doing this is if you ping one off to the Swiss space program it doesn’t really matter as it is not part of the movement and is really cheap to get lots of practice.

 

Tom

Oh, and you have potential spares for the future 😀

 

Tom

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Tweezer acrobatics. First make sure your tweezers are dressed. Then practice picking up small items such as very small screws etc then try and turn the item 180 degrees without dropping the item. Trust me it’s not easy. 

  • Thanks 1
Link to comment
Share on other sites

6 hours ago, tomh207 said:

I bought selections of 100 each of screws, springs and click springs from cousinsuk, cost about £6.00. I have been taking them from their boxes onto the mat, turning them over, picking up and putting them in another dish then reversing the process after doing all 100 of a type. Advantage of doing this is if you ping one off to the Swiss space program it doesn’t really matter as it is not part of the movement and is really cheap to get lots of practice.

 

Tom

Oh, and you have potential spares for the future 😀

 

Tom

Thank you very much. Already in the shopping cart and I will have lots to practice

Link to comment
Share on other sites

6 hours ago, clockboy said:

Tweezer acrobatics. First make sure your tweezers are dressed. Then practice picking up small items such as very small screws etc then try and turn the item 180 degrees without dropping the item. Trust me it’s not easy. 

Good practice for a couple of days will develop your natural ability,  keep at it. 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its a touch under ive just remeasured it and added a wrist shot. Unbelievably it was £13  plus 3 postage. You dont find watches that nice for that money every day of the week. Maybe removing the epilame in the oil region improves the purpose of it. We may know very soon as i emailed Episurf 4 hours ago to ask that exact question. 🤞they are happy to provide an answer for us. How do you fancy trying a stearic acid vapour treatment experiment  H .  Shall i have a go this afternoon ?
    • That's the size of my grandfather's Ernest Borel watch. Definitely not a lady's watch! 👍
    • Thanks H It does have a big crown for the watch , it could be considered a ladies watch these days i guess, it measures 33mm case 36mm with that large crown 18mm lug space. A tad small for a guy of today, but still very wearable. The photo was deceptive so here it is adorning my 7 1/4 " wrist. It need some love to make it run better. The hair coils are touching so running a bit fast at the moment,  not caused by magnetism, and maybe just a clean and a service. The dtal is in fantastic shape.
    • That's one beautiful timepiece! Love the big crown in proportion to the case. Perhaps a ladies' watch, but I don't think so. I have a "modern Ingersoll" watch, but it has nothing to do with the original brand (Miyota 9015 movement). Interesting synonym for synthetic oils! 😆 There is, of course, a limit to how large a volume of oil epilame can bind and hold in place. If the oleophobic effect is too strong then it can become a problem. I'm not sure where I heard or read it, but as I understand it, the active ingredient in a bottle of epilame is extremely small and more than 99% of the contents of the bottle is just a transfer agent. If the active ingredient becomes too concentrated, which it can become over time, or if the product is of poor quality, the oleophobic effect is amplified. This in turn causes the applied oil to look like a gummed-up ball on the surface of the treated part. If that happens, we know that the active ingredient has become too concentrated. What we want is for the oil to bind but not to the point where it is formed into an excessively round ball on the surface. The highlighted text in the patent that you refer to describes well the problem that can arise with too high a concentration of the active ingredient. However, I would be extremely surprised if the entire amount of oil leaves the treated surface as water on wax would. At present, I am convinced that the analogy between wax and water on the one hand and epilame and oil on the other is incorrect. Epilame is described as binding and that is also my absolute experience. Epilame probably has some repelling effect but that is not its main purpose and that is not how epilame is designed and works. The method of abrading the epilame treatment from the section of the pallet stones coming in contact with the escape wheel teeth seems after even more research to be well established, but if it actually works, if so how and why is beyond what I can currently understand. Perhaps it is just to do and trust that it is based on well-established experience. I am, after all, inclined to think so.
    • Sorry to jump in here, but I didn't want to start a new thread when there's already one regarding the second hand watch market. Can anyone tell me what I should be looking at when buying watches from eBay? I see loads on there for quite cheap, but after reading this thread I'm guessing they're all garbage and not worth the time? I recently bought an old Elco watch for 99p, just to practice on. I'm also really fond of the look of Services watches and Smiths Empire watches. I keep seeing them listed for around 5 or 6 pounds. Are they not worth the time buying? I'm not looking to sell watches to make a profit. I just want to buy watches I like the look of and wear them, but I also don't want to buy things that are going to be impossible to find parts for, or that have already been abused by someone else and broken beyond repair. Any tips?
×
×
  • Create New...