Jump to content

Waltham military-era watch. Not a hack watch.

LittleWatchShop
 Share

Recommended Posts

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted

Got this on Ebay...more amusement for me and practice (as if I don't have a ton of watches here already in the queue).  It is fun to work on something I am familiar with.  This is no doubt the simplest watch I have worked on since there is no sweep second hand to deal with.

It was pretty froze up.  I guess oil dried up in the barrel.  I had to manually let the power off with a screwdriver as the mainspring could not overcome the friction.

Anyway...disassemble and cleaned the proper way.

Always my biggest challenge for these non-shockproofed watches is the reassembly of the balance wheel after removing it from the cock in order to remove the cap jewel.  Extremely tedious and very time consuming.  Hey...I am an amateur...have not learned the tricks to making this easy...give me time.

Here it is...running.  I have not timed it yet.  You can see that it has a new crystal.  Another one from a box of crystals I bought off of Ebay.  Steadily improving my ROI.  But, frankly, just being able to grab something from stock is very satisfying!!

Oh...I was surprised to find that this was a snap-together case vs. screw back.

I removed the lume from the hands carefully in a baggie in case it was radium.  Baggie is sealed and in the trash.  Hands are a little rusty.  Need to research cleaning them up.

2021-05-19 18_52_13-Photos.png

2021-05-19 18_51_44-Photos.png

  • Like 2
Link to comment
Share on other sites
  • 2 weeks later...
chadman Member

chadman

Posted
Posted

Sweet LWS!  I really like the style or font of the numbers.  I wouldn't have given the case a second look regarding authenticity but once you pointed it out...it does seem a little at odds with the style of the dial and hands.  But so what if you like it? 

Are you going to re-lume the hands?  I haven't ever done it but someday....BTW, I agree on the non-shock cap jewel balance cleaning.

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
3 hours ago, LittleWatchShop said:

A friend loaned me a geiger counter...it is radium!!

obviously a defective Geiger counter. Didn't we decide they discontinued radium like a century ago? Yes it is one of the sad problems of if you're going to get upset about these things the radium hands are still amongst us. At least with the Geiger counter you can check your bench and everywhere you worked with it just to make sure you didn't leave anything lingering behind.

3 hours ago, LittleWatchShop said:

Dunno...kinda want to re blue the hands, but reading this forum...seems it is not for the faint of heart.

the bluing pard isn't exactly the problem somewhere in the group were having a discussion. The part I would be concerned about is those are not pocket watch hands and attempting to polish them in any mechanical fashion which you would have to do to remove them is going to be problematic. I'm not sure it probably turn out to be hideous mess but you can probably use a liquid rust remover to clean up the hands which will unfortunately take the bluing off. Then you may build a use some sort of a chemical bluing at least turn the hands blackish in color as opposed to broken hands. But that would probably just be me if I tried to polish them. Then if you have darkened hands that are rusty you can read Lu or just remove what you have.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Thanks, ManSkirtBrew.  I started looking for a setup like yours and ran across this.  It was about half the price of the JKA Feintaster (depending on what auction you were in), and it's a Bergeon.  I bought it because I thought the price was fair (eBay - Buy it now), and I'm a sucker for vintage tools. It also has a table, so it should be easy to use for measuring jewels. I wonder if the the contact points can be changed out. Bergeon seems to manufacture new tables and accessories for the contemporary dial version. What do you guys think of it? I'm sorry this post seems to have taken a detour. I'm new here so let me know if I should start a new topic.
    • nevenbekriev
      Winding pinion making

      By nevenbekriev · Posted

      This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
    • Trav2004
      Help Identifying movement

      By Trav2004 · Posted

      After a bit further research could it possibly be an AS 970?
    • Bonefixer
      FHF70 balance jewels settings

      By Bonefixer · Posted

      Latest project was a non-running ebay purchase with an FHF70 movement. I stripped and cleaned it, reassembled it, and got it running. So far so good, nothing damaged AFAIK.  I was oiling the top jewel on the balance (the one in the cock) which was a slightly unusual shock setting. I removed the spring (3 leaves) which was part of a chaton holding the cap jewel. This left the hole jewel behind which I retrieved with rodico and then lost it. I was taking it off the rodico, very gently as I thought, with tweezers, and then it just disappeared.  Fast forward a week, I got a donor movement, non-running, with the plan to just take the shock jewel that I’d lost. It was the same movement but had standard incabloc settings, and was steel rather than copper/brass.  I changed the cock and balance complete and it ran, not very well. I switched the lower jewel setting, cleaned and oiled both jewels and the replacement balance. Without the pallet fork the balance swings very nicely with a puff of air. With the fork in place, balance out, it flicks side to side nicely with power in the mainspring.  Put them together and it doesn’t run. The impulse jewel sits in the fork and it stops.      Any suggestions how I proceed? In case you didn’t follow that I have 2 FHF70 movements, nothing broken as far as I can tell, but mixing up the balance wheels and jewel settings results in a non runner. 
    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Oh and this almost perfect third wheel pivot and slightly set mainspring  Ah ok yes i see what you mean, good idea. I'll try that if i fluff this one up. The image isn't great quality but i like the idea though.
×
×
  • Create New...