Jump to content

Cousins Bench vice

transporter
 Share

Recommended Posts

transporter Super WRT Addict

transporter

Posted
Posted

Just in case anyone is waiting for them to come back in stock, they are now in stock, only 87 left as I've just bought one, need it for the DLC. Jaws are 45mm and it runs on dove tails so very nice action. It looks like a direct copy of the Bergeon model of the same specs, just £200 cheaper!!!!

Also ordered the cousins mainspring let down tool, as I'm going down the clock path with the DLC so now re tooling fro watch tools to Clock specific tools now.

  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nevenbekriev
      Converting Pocket Watch to jewels

      By nevenbekriev · Posted

      Daniel, I guess You actually asked if the accuracy of the watch was improved after jewels added. One would not expect such accuracy improvement. The watch accuracy depends on many things and most of them are related to the balance and escapement. Well, it depends what is considered to be a no jeweled watch. If this is pin pallet watch wit cone balance pivots, then, believe me, replacing balance staff with one with cylindrical pivots in jewels will only worsen the things. Cone shaped pivots in cup bearings actually work better than  cylindrical, the only problem is that they wear faster. And, it will be hard to impossible to replace the pallet pins with ruby pins... The watch accuracy depends maimly on the balance and escapement adjustments ad it is no related to the presence of jewels. Adding jewels to the train wheel bearings may only lead to some amplitude increasing, and it is not sure too.  
    • Knebo
      filling a tiny hole in lume (not re-doing the whole lume)

      By Knebo · Posted

      Thank you so much! I'll experiment a bit with the UV glue and chalk and maybe eventually try to fill the hole.  I'll report back!  
    • AndyGSi
      Waltham 361

      By AndyGSi · Posted

      How did you know to shorten the bottom pivot and not the top? It sounds like something is rubbing when in the dial up position.
    • dnhb
      Pocket watch mainspring replacement

      By dnhb · Posted

      With apologies for taking advantage of your kindness in responding, would you be able to indicate what sort of additional info is needed & where on the watch I might find it? Do you have any suggestions as to what Cousins might mean by "a normal  bridle"? ( their website says they can't provide any technical information....)
    • Murks
      Waltham 361

      By Murks · Posted

      Yeah, it looks exactly like that, but the balance staff pivots was long when fit into the jewels, so I took some  bits shorten it from the bottom pivot but  when  I made the movement run  on all position and all the other position works fine but not on dial up position.  and im not getting any reading from my timegrapher So what do you reckon the issue could be do I need to shorten the bottom pivot more and also a notice the balance rim is really close to the center wheel teeth  feel  it's catching the rim.
×
×
  • Create New...