Jump to content

Gradus - Another Under-Rated Make

WillFly

By WillFly
in Your Watch Collection

 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Gradus was yet another solid Swiss manufacture from the 1950s/60s that used a selection of solid movements. They go from anywhere between £20 and £60 on the Bay or in auctions. Imagine my surprise when I spotted this one going for £8 on eBay - with no bids on it. Well ... you know me ... It needs a new crystal, and the bracelet will be replaced by a nice, new 18mm leather strap, but it's in excellent nick, with a nice FHF-ST 96 movement in it. A bargain as far as I'm concerned.

 

post-64-0-62233400-1426533788_thumb.jpg

post-64-0-24835000-1426533792_thumb.jpg

Link to comment
Share on other sites
  • 8 months later...
ramrod Super WRT Addict

ramrod

Posted
Posted

i've never seen or heard of a gradus until now. there are two on fleabay - one of them is going for small money it seems. i might have to look a these in the future.i really like those underrated and underappreciated brands. it makes collecting a LOT cheaper.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Ross yes we all love the forum and yes a lot of these facebook groups are awful and will never compare to what we have here. But facebook is exactly what you make it for yourself, some let the world know what they had for tea and if they threw it up again lol. It took me years to enter into the realm of facebook and 95 % of it i ignore completely,  i use it to my advantage, I'm not an addict of it like most of the world is. My profile contains absolutely nothing about me, its not even my real name, all it is for me is a vehical for me to access information, if i dont like what i see i ignore it. You develop an attitude of indignation towards the vast majority of it.
    • mikepilk
      Omega snap on case back VERY hard to remove.

      By mikepilk · Posted

      No, It's still showing the "20 Micron" between the lugs.
    • B1N9S
      Vertex Dirty Dozen retainer ring

      By B1N9S · Posted

      Thanks for the replies.  @Neverenoughwatches  If you have something that looks suitable, let me know and I'll get some dimensions.  Thanks.
    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Thinking.  Mark has said he would be here for the foreseeable.  I have looked at other watch forums. One will not let me join as my 'browser' is not set? Another feels very complicated. Another has showing of collections of Rolex etc, all vying to show what they have. Not what they do for watch servicing. And, the criticism of others is so prevalent.  I asked a question and received, "Read a book more often" as a reply. I was given advice and constructive criticism by members, who advised the book, but realised as a result of my dyslexia, my difficulties. And so spent time assisting me.  I like and enjoy this forum. I am at 2 1/2 years into my self imposed 5 year apprenticeship. Averaging 10 hrs per week. I can do virtually anything that needs to be done. I still lack some tools. DIY skills makes a lot of things available to me. Someone made the comment about 'Facebook'? Open my life for the inspection of others? No thank you.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      Come on chaps i need some ideas, i have the right staff for the movement, i can probably make up another hairspring and balance wheel with some effort involved, which might not run time accurate but i can deal with that. What I'm really stuck with is an oversized roller hole to fit onto the staff. I cant make a roller, so i have to make this one fit, which is looking like a fastening in repair with adhesive.  Getting the staff in centrally is going to be difficult, I'm guessing the space around the staff is about 50 microns. My other option is to track down a different staff with a better roller fitting profile but match profile sizes elsewhere,  or another correct roller, I'm sure this one has been broached out. It may not even be the correct roller, the staff sits really low inside it. I could just rodico the roller on and then test to see how it interacts with the fork.
×
×
  • Create New...