Jump to content

HoroSilv: US alternative?


toeshoeman

Recommended Posts

I am looking to resilver a dial but I have not had any luck finding Horosilv in the US. Does anyone know where I can get it in the US? Or if there is an alternative that I can buy? I know I could always order it from the UK, but that gets pricey quickly.

Thanks for the help! 

Link to comment
Share on other sites

I think you can get silver nitrate in most drugstores (here for sure), with that- you want it dry, not in solution- cream of tartar, and salt you can make your own. 1 part silver nitrate to 8 parts salt 8 parts cream of tartar (use a scale), it's good to grind it with a mortar and pestle. Keep in a brown glass jar and away from light. It's used the same as any silvering powder. When done, rub the surface down with more cream of tartar, wet, rinse, and you're done.

  • Like 2
Link to comment
Share on other sites

On 8/18/2020 at 4:13 PM, nickelsilver said:

I think you can get silver nitrate in most drugstores (here for sure), with that- you want it dry, not in solution- cream of tartar,

So the silver nitrate is in powder- or crystal-form I suppose? Just so I know what to ask for, when I go down to the "Apotheke". It's expensive stuff to be buying the wrong sort.

By cream of tartar, are you talking about simple baking powder (Backpulver), or specifically "Weinstein / Weinstein-Backpulver" (which is apparently potassium sodium tartrate)? According to Wikipedia, this is a chemical which has been used in silvering mirrors and electroplating, so I'm guessing that's the one to get. I of course don't have any, but I do have lots of baking powder.

Link to comment
Share on other sites

Yes you want the powder silver nitrate, it's more like clumpy crystals like coarse salt. Cream of tartar is potassium bitartrate.

 

It's been a while but I think I paid 80 bucks for 100 grams last time I bought silver nitrate 5 or 6 years ago. That's a lot, 20 grams or even 10 is plenty for a number of clock dials.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...