Jump to content

Maurice Lacroix quartz questions


Recommended Posts

Hi all,

I'm considering buying a ML quartz watch and I've found quite a few on ebay. I don't buy anything without researching info. So I've spent hours searching the web for ML info and can't find any info on quartz movements they used, the accuracy or what batteries should be used. It's like all info on ML quartz watches made in the 1970s have fallen into a black hole. Can someone help?

Thanks,

henryr

Link to comment
Share on other sites

A question to ask is "Did Maurice Lacroix actually make and sell quartz watches in the 1970s?".

I'm sure you've already come across it but this provides some useful history: http://heritageofwatches.com/wp/2016/05/14/maurice-lacroix-watches-brand-profile-history-and-products/

The brand didn't come into being until 1975 and seem to have concentrated on mechanical watches. It was only into the '80s and '90s they seriously expanded and, presumably, started to offer quartz based watches. From what I've seen these are ETA based movements i.e. ML buy them in.

Edited by WatchMaker
Link to comment
Share on other sites

After some searching it seems ML started using quartz movements in the 80s.The ML quartz watches I'm considering are a Maurice Lacroix Les Classiques LC1007-AS62435, Maurice Lacroix Masterpiece LC1098 and a Maurice Lacroix Watch Moonphase Date Caliber 737-701. And I finally created an account on the ML website thinking I might get access to info or at least be able to contact them via email...no to both of those. I'm amazed that ML cannot be contacted. Can anyone steer me towards a source of info?

Thanks,

henryr

 

Link to comment
Share on other sites

On 6/7/2020 at 11:47 PM, henryr said:

Can anyone steer me towards a source of info?

Ask the seller to send a pic with caseback removed, that is always a good practice in order to check for corrosion. Then one can identify what it is. But as mentioned above it will be a regular Swiss quartz module

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...