Jump to content

Fixing a stem release button

Daniel3

By Daniel3
in Watch Repairs Help & Advice

 Share

Recommended Posts

Daniel3 New Member

Daniel3

Posted
Posted

Hi there, 

I learned through the channel how to remove the stem of my watch through a push down button and am aware that too much force removes a spring that prevents removal of the stem, I have been very gentle with this as I have been required to remove the stem to get to the front of the dial to fix dial chapters that keep falling out though I can no longer remove the stem and I fear this spring may have shifted, I have a bezel set crystal and have not been able to find how to remove the crystal without removing the stem so I’m in a bit of a predicament and was also wondering if there was a simple video for replacing the spring that has been shifted, it’s a quartz movement, should I go to a watch repair shop or is it a relatively easy fix? Thanks 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      Nice interesting diver Razz, i have a sheffield dress watch, different movement altogether. Could be a wrong motion works part, how does the setting feel before fitting the cannon pinion, clutch and intermediate wheel meshing ok ?  The less traditional setting design could be suspect, the second wheel has a slip clutch assembly, that most likely needs looking at. LA is 42 ° Razz Tbh i  much prefer to call the complete unit the lever, then use the seperate names for all of its components. Such as guard pin, fork, fork horns, fork slot, lever arm, pallets , pallet arms, pallet slot, pallet stones. I suppose pallet fork is the combination of the two opposite ends that make up the lever, its also called the anchor which is descriptive of its appearance.  Its a pretty basic 1930s  swiss lever movement H and yes Nev was meaning the pallet fork.
    • RichardHarris123
      AS 554 from 1930

      By RichardHarris123 · Posted

      The pallet fork should really be called a lever, English lever, Swiss lever etc but most people including myself call it a pallet fork.
    • RichardHarris123
      Seiko 6309a diver crown replacement

      By RichardHarris123 · Posted

      Seiko have case numbers, I  can't see it on your photos.  If you can find that we can look for a genuine crown.  If not, you need to measure the diameter of the stem, the distance between the lugs and the depth of the lugs.  The case number will be something like this. 
    • VWatchie
      AS 554 from 1930

      By VWatchie · Posted

      I'm not sure what kind of movement this is, but I'm curious to know if you're using the word "lever" as a synonym for "pallet fork"?
    • Razz
      AS 554 from 1930

      By Razz · Posted

      Actually kind of rough, maybe munute wheel pinion problems? Is the 2.73mm canion oinion which seems rarer and not availble on Cousins UK. The seconds hand works and suprising nice amplitude but don't know the lift angle and BE this one says 17 j but is a pin pallet as well. Cap jewels on the escape and drive train pivots. Interestingly in has both water proof and shock resistant on the caseback and dial. Puts this around 1969 or '70? The double bezel that works independently is cool has the pi symbol on each. Wonder if it can be used like a slide rule ir something...
×
×
  • Create New...