Jump to content

Omega 601 regulating

StephenLev
 Share

Recommended Posts

StephenLev Member

StephenLev

Posted
Posted

I have just serviced an Omega 601. To regulate the watch there is a small offset screw in the centre of the regulating index. When I turn this either way the watch is still running about 100s per day slow. Is there a coarse adjustment available on this watch.  The amplitude is about 230deg and the beat error is 0.7. Please advise.

Screenshot_20190628-222442.jpg

Link to comment
Share on other sites
StephenLev Member

StephenLev

Posted
  • Author
Posted

Thanks for your help.  As far as the amplitude us concerned. I pegged the jewels, cleaned the parts in lighter fluid in an ultrasonic cleaner, and rinsed in pure alcohol. I lubricated to the best of my knowledge using Moebius oils. The only thing I did not do was change the main spring, although I cleaned and lubricated it. What else can I do to improve the amplitude?

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • JonC
      Leaving the forum for a while.

      By JonC · Posted

      Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...