Jump to content

New member

gemmyintl

By gemmyintl
in Introduce Yourself Here

 Share

Recommended Posts

gemmyintl New Member

gemmyintl

Posted
Posted

My name is Jimmy Flynn.  I am a retired jewelry designer and graduate gemologist who has always had a fascination with mechanical watches.  About ten months ago I stumbled on the Watch Repair Channel on Youtube and watched episodes from time to time.  I noticed that the workflow and toolbox was somewhat similar to jewelry making, though tidier, more precise, and certainly requiring tighter discipline.  So around August I jumped in and started buying some inexpensive watches on ebay to practice on.  I now have close to a hundred watches, mostly Bulova; Elgin; Croton; Gruen; Benrus; Baylor; Hamilton; etc., with maybe a half dozen karat gold examples, and a Certina, a couple of Omegas, and about four Longines to boot. 

My experience with repairing so far has been confined to a couple of teardowns [without re-assembly yet], changing out a couple of movements, and/or dials, and of course new crystals.  I have purchased some of the basic tools that are unique to watchmaking, such as hand presses, back presses, crystal compressors, etc.  I am into this just for fun currently, but if I can gain proficiency at my advanced age I might try some commerce as well.  Not in a hurry, just wish to look back month after month and see some advancement in my experience.

I will start photographing some of my more interesting items in the future, such as a Pie Pan dial 23 jewel Swiza, and a 41 jewel Olympic Superautomatic.

I found this site searching for information on how to get the broken stem out of a stainless steel Nirva crown, and am awaiting some Alum that I ordered so I can finish off this beautiful insane green dial automatic Nirva that I stumbled on.

Always willing to participate, and offer a hand if needed

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...