Setting Hands On 7750

[Stevo2022]

I'm a newb who is a bit late to the party here. I've purchased a Horia movement holder clone. And I'm aware that the support pins for the SW500 chronograph jewels can be different sizes.

I purchased 0.8mm pins with the holder. These were all that were available at the time. Will these be the right size?

Can someone shed a little light on this for me please?

Edited 13 hours ago by Stevo2022
Error

[tomh207]

@Stevo2022

you are unlikely to get a response from these members as they haven’t logged in for a few years. I think you will do better starting your own thread, more people will see it.

 

Tom

[Mark]

27 minutes ago, tomh207 said:

@Stevo2022

you are unlikely to get a response from these members as they haven’t logged in for a few years. I think you will do better starting your own thread, more people will see it.

 

Tom

Ive split this into a new topic.

[AndyGSi]

Looking at the genuine Bergeon holder I expect the 0.8mm will be too big.

Edit

You should be able to check with the pins out of the
holder if they pass through the surround to the jewel.

Edited 7 hours ago by AndyGSi