Jump to content

ETA 2472 - how to tackle this crown and stem?

Michalzeszen
 Share

Recommended Posts

Michalzeszen Member

Michalzeszen

Posted
Posted

Hi there!

I have been servicing an old Technos Star Chief from the 70s, and so far so good, except for the crown and stem.

This is only my 4th or 5th watch service after a year of fiddling with cheap movements, and I'm having a hard time understanding this seting mechanism.

 

1. What is is called?

2. How do I assemble it?

3. Can we confirm all is there?

ps.: bonus pics demonstrating how it was bought and how it is going.

 

20250505_222456(1).jpg

25147488_3.jpg

20250505_222525.jpg

Klassiker Distinguished Member

Klassiker

Posted
Posted

It's a so-called split stem. I'm guessing the spring is for the screw-down crown operation. I don't think I've ever seen both features together before, but it looks complete. If I'm right, the crown will have an inner thread and the tube a matching external thread. Replace the seals if you want it to be watertight.

If you can compress the spring far enough, slide the two parts of the stem together sideways. If that doesn't work, you should be able to push them back together end to end, the opposite of how you pulled them apart. 

  • Like 2
  • Thanks 2
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted
17 hours ago, Klassiker said:

If that doesn't work, you should be able to push them back together end to end, the opposite of how you pulled them apart. 

I had a feeling the worst would happen, and it did. The smallest pressure applied to the crown broke one side of its little leg.

I think I'll replace it with a traditional system if possible.

This, I believe. I'm shocked at how expensive the parts for this model are.

Klassiker Distinguished Member

Klassiker

Posted
Posted

Richard and Andy both make very important observations, so let's take a step back and see what we are dealing with.

Does the crown tube in the case have a thread on it?

How did you remove the stem? Do you have a photo of the movement in the case?

You might be able to remove the female part of the split stem and reuse the existing crown. Can you see a thread?

There are one-piece stems available for the 2472 for reasonable prices. The split stems I found on ebay for the 2472 are a little more expensive, but have the male and female parts the opposite way round.

  • Like 3
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted (edited)

OK. Little panic, but I'm composed now. haha

I need some support on this one, and you guys immediately noticed that. Thank you!

To help us navigate the situation, I recorded a video of the case and crown:

https://youtu.be/tfTLZrLiaqg?si=hIW8Jbmp1DPb9fZC

The measuremen

3 hours ago, Klassiker said:

Does the crown tube in the case have a thread on it?

 

Yes, it does.

3 hours ago, Klassiker said:

How did you remove the stem?

There was water damage, and the two pieces (stem and crown) split up when I removed the crown. I didn't have a chance to see the assembled mechanism, but this eBay ad has the same assembly with adequate pictures.

3 hours ago, Klassiker said:

You might be able to remove the female part of the split stem and reuse the existing crown. Can you see a thread?

I'll try that. Quite afraid of breaking it, thought.

Edited by Michalzeszen
AndyGSi Distinguished Member

AndyGSi

Posted
Posted (edited)

So the eBay crown won't work with your case.

It's looking like your options are going to be limited with this one.

Edit

Just found this so looks like you can remove the stem part from
the crown but what you replace it with is another question.

image.thumb.png.a738d2562ba362efd771357b94cb2d1b.png

Edited by AndyGSi
  • Like 1
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted

You guys were correct, I can reuse the crown. Now it is a matter of finding the small split steam on eBay!

20250507_114527.jpg

20250507_114710.jpg

20250507_114755.jpg

3 minutes ago, AndyGSi said:

the crown but what you replace it with is another question.

 

Yep, just realized this as well. Now it is a matter of finding the new piece, which will most certainly be a pain

Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted (edited)
2 minutes ago, nevenbekriev said:

You best option is t convert it to regular crown with tube sealing. But, the case and the back are totally  toasted, ready for the dust bin.

Can you elaborate? I'm really new to this. What Case and back are you reffering to?

Edited by Michalzeszen
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted (edited)
7 minutes ago, RichardHarris123 said:

I don't understand why it needs to be a split stem. 

From my perspective it doesn't need to be. In this scenario, I'd love some help identifying the correct parts for a conversion.

Oscillating weight, bracelet and crystal are not original, so there is margin for adaptations.

Edited by Michalzeszen
nevenbekriev Distinguished Member

nevenbekriev

Posted
Posted

What I mean is to use standard tube and crown, like 2.5mm tube for example. You will need to remove the existing tube or in some way to turn or file the part with the thread, then to put in 2.5mm tube and fix it in place. I don't know if the hole will have to be enlarged or if it is possible to just reshape the existing tube by removing the part with the thread from it. The new tube can be press fit wit some locktite for water tightness, or led soldered for example.

I doubt it was a split stem, it has to be just screw-in crown, and the construction is similar to split stem. With standard tube, You will not need split stem, but regular stem that will be shortened to size.

What I meant for the case and back is that watch cases polishing is separate, different craft that is not easy one. In my country only few people are good in this and I am not one of them. The main idea is not to change the shape of the cases, or keep them as close to the original look as possible. This includes never to round the edges and corners for example. Don't take me wrong, if You like it and it brings You joy, this is OK. But, the world is full with examples of not correctly done (ruined) cases. By the way, plated cases are the hardest thing to restore.

AndyGSi Distinguished Member

AndyGSi

Posted
Posted
16 minutes ago, nevenbekriev said:

What I meant for the case and back is that watch cases polishing is separate, different craft that is not easy one. In my country only few people are good in this and I am not one of them. The main idea is not to change the shape of the cases, or keep them as close to the original look as possible. This includes never to round the edges and corners for example. Don't take me wrong, if You like it and it brings You joy, this is OK. But, the world is full with examples of not correctly done (ruined) cases. By the way, plated cases are the hardest thing to restore.

Looking at what @Michalzeszen has already done with the case and back I don't see a problem with it.

1 hour ago, RichardHarris123 said:

I don't understand why it needs to be a split stem. 

The only reason it's a split stem (of sorts) is because of the screw down crown not having the spring built into it.

1 hour ago, Michalzeszen said:

From my perspective it doesn't need to be. In this scenario, I'd love some help identifying the correct parts for a conversion.

You need to see how the existing tube is fitted in the case.

A photo of the inside would help.

  • Thanks 1
AndyGSi Distinguished Member

AndyGSi

Posted
Posted
1 minute ago, RichardHarris123 said:

So not strictly necessary?

If they want to use the original screw down crown then yes it's necessary, otherwise there's no play from the winding position to screw it down

  • Like 1
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted
1 hour ago, nevenbekriev said:

What I meant for the case and back is that watch cases polishing is separate, different craft that is not easy one. In my country only few people are good in this and I am not one of them. The main idea is not to change the shape of the cases, or keep them as close to the original look as possible. This includes never to round the edges and corners for example. Don't take me wrong, if You like it and it brings You joy, this is OK. But, the world is full with examples of not correctly done (ruined) cases. By the way, plated cases are the hardest thing to restore.

I mean... I'm buying 15-30 USD watches and doing my best to bring them to life. I don't expect it to be perfect, but if you check the YouTube link I provided above, you'll realize I did an OK job bringing the case back to life. Will it be a precious collectible? Hardly. But for daily use, it is awesome.

 

1 hour ago, AndyGSi said:

A photo of the inside would help.

Attached.

 

20250507_153235.jpg

20250507_153505.jpg

20250507_153510.jpg

20250507_153515.jpg

20250507_153519.jpg

  • Like 1
AndyGSi Distinguished Member

AndyGSi

Posted
Posted

So to me you'd do more harm trying to remove that existing tube.

Unfortunately nothings coming to mind at the moment as an east fix while keeping the screw down crown.

  • Sad 1
Michalzeszen Member

Michalzeszen

Posted
  • Author
Posted
1 hour ago, AndyGSi said:

So to me you'd do more harm trying to remove that existing tube.

Unfortunately nothings coming to mind at the moment as an east fix while keeping the screw down crown.

Andy, why you betray me?

 

I may have good news. I'll share later!

I have contacted an old watchmaker from my town, and the guy has it all. He is offline, so no parts are available to purchase, but he offered to send one for less than 10 USD, which is great.

I'm now checking if he has an oscillating weight as well, to close up all that I need to put this movement to work.

 

Thank you all for the support. And if any good soul finds a video of the assembly process of this stem and crown, it would complete my day!

 

Imagem do WhatsApp de 2025-05-07 à(s) 17.18.14_48c67fad.jpg

Imagem do WhatsApp de 2025-05-07 à(s) 15.49.43_564f6793.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

  • Topics

  • Posts

    • dnhb
      Loose roller table

      By dnhb · Posted

      Thank you very much for this. Re: 1. I've so far found that this one needs something thicker than 2x kitchen foil (another suggestion in that thread)! 2. I've been checking where the roller needs to be in relation to the wheel, the hairspring stud/arm & the pallet fork to try to get it right first time. 3. Does one raise notches at both ends of the tube? 4. What is a "driver roller sharpener"?
    • mbwatch
      Elgin Grade 315: Runs/stops with dial down/up

      By mbwatch · Posted

      Hmm, if it is sitting that low I am not sure I would blame end shake (which would be to blame if you turned it DU and the hairspring touched the balance cock). If it is sitting so low that the balance rubs on the pallet bridge I would verify that the balance arms are not dished downward and also that the lower balance jewel doesn't have an issue such as being chipped. Or the balance staff is actually too short, which would have caused your earlier end shake problems too. If you install the pallet bridge without the pallet fork and install the balance, is your free oscillation still good or is it immediately bound up on the pallet bridge? (I have an elgin watch like that where someone in the past ground down the pallet bridge significantly) Yes, you'll need to rotate the hairspring but deal with the pallet bridge interference first.
    • docrpm
      Elgin Grade 315: Runs/stops with dial down/up

      By docrpm · Posted

      Ok. So given that I had free oscillations DU/DD for roughly the same time, I reassembled with the pallet fork and bridge underneath, and now I can see two more problems.    1. The arms of the balance are nearly flush with the pallet bridge. Bad. I can speculate as to why…the end shake still looks to be too much. Maybe other causes as well? 2. The balance doesn’t spin freely. In the resting position, it looks like the impulse jewel is outside the jaws of the pallet fork. Not by much, but still outside. If it needs be inside in the static position, then I’m guessing I’ll need to rotate my hairspring collet to change orientation by a few degrees.    The journey continues…
    • stm
      Doxa women's watch (radioactive)

      By stm · Posted

      Ok, that's good to know, thank you.
    • Michalzeszen
      ETA 2472 - how to tackle this crown and stem?

      By Michalzeszen · Posted

      Andy, why you betray me?   I may have good news. I'll share later! I have contacted an old watchmaker from my town, and the guy has it all. He is offline, so no parts are available to purchase, but he offered to send one for less than 10 USD, which is great. I'm now checking if he has an oscillating weight as well, to close up all that I need to put this movement to work.   Thank you all for the support. And if any good soul finds a video of the assembly process of this stem and crown, it would complete my day!  
×
×
  • Create New...