Jump to content

National electric watch cleaning machine

transporter
 Share

Recommended Posts

transporter Super WRT Addict

transporter

Posted
Posted

Well, the local auction had this up for sale, got it for £55 in fully working   Condition.
Now I’ve done some reading through past posts on wiring, heating elements and so forth, I have come to the conclusion that baskets are the main problem.
Now mine doesn’t have any, so a Quick Look on eBay and I’ve found some generic baskets that I can fit.
I have ordered a 20cm length of 15mm diameter alloy rod that I’ll mount up on the lathe and bore an 8cm diameter hole 5cm deep and drill and tap a hole for the grub securing screw.
Once that end is done ( motor end ) I’ll turn my attention to the basket end as I don’t know the inside diameter of the hole on the basket frame. But once I do I’ll turn the rod down and again drill and tap a hole to secure the frame to the shaft.
The machine does take up a lot of space on the bench so it might have to live in the garage with my clock cleaning US tank and rinsed and steam cleaner and other bulky tools.
Hopefully I can make it fit, if not it’s out to the garage.

IMG_9672.jpeg

IMG_9668.jpeg

  • Like 1
SwissSeiko WRT Addict

SwissSeiko

Posted
Posted

I have this same basket that I used for my automated machine. Its ok, but the compartments in the individual baskets are not seated on the bottom, which allows thin parts to move to other compartments. I plan on using it still, but im printing a new basket to use on nicer movements to its doesnt scratch, and keeps the parts separate. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tonydagee
      Calendar work certina 25-651

      By tonydagee · Posted

      Hello all, just disassembling to service, but I can’t figure out the working of the calendar work…it’s not operational the jumper and spring are ok, but the operation of the driving wheel has me at a loss. I can’t see a cam to drive anything. Is something damaged or missing? Help please!
    • tIB
      Unusual Seiko dial damage

      By tIB · Posted

      Believe the relume (not a fan) was done a long time after the damage. 
    • Malocchio
      Unusual Seiko dial damage

      By Malocchio · Posted

      I can only think of some chemical reaction to reluming
    • nickelsilver
      A lathe with indexing that won't break the bank?

      By nickelsilver · Posted

      I have a little milling attachment for my WW lathe, but very rarely use it and not for wheel and pinion cutting. For that I use a small Sixis 101 milling machine. I normally do direct dividing, but sometimes have to do an odd count and use the universal index which also fits on the Sixis.   Back in the day when I didn't have a mill, I would cut gearing on my Schaublin 102. It has a universal dividing attachment which fits the back of the spindle. Both it and the one for the Sixis are 60:1 ratio, and with the set of 4  index plates I can do almost any division. When I've had to do a strange high count prime number, I print a disc with the needed division and just place the plunger on the dot. Any position error is reduced by a factor of 60 so still plenty accurate.   The machines are a mess in the pics as I'm in the process of making a batch of barrels for a wristwatch 🙃.   This is the Sixis. The head can also be placed vertically, as can the dividing spindle.   Dividing plates. The smaller ones fit another dividing spindle.   Universal divider for the Sixis. I put it together with parts from an odd Sixis spindle that takes w20 collets, like the Schaublin 102, and a dividing attachment from a Schaublin mill.     The dividing attachment for the 102. The gear fits in place of the handwheel at the back of the headstock.   And the little milling attachment for the WW lathe. I just set it on the slide rest to illustrate the size, you can see from the dust on it it really doesn't get used much. I think only when I change bearing in the head, to kiss the collet head seat (grinding wheel still in the milling attachment).
    • SidKop
      Opinions on Seiko's 4R and 6R movement quality from those more able to judge

      By SidKop · Posted

      I read a lot about the quality (or lack thereof) of Seiko's 4R, 6R, 8L  movements...or more specifically the lack of regulation from the factory. Especially when compared to similar priced manufactures using SW200's or ETA's. I thought I'd ask those more in the know, do the 4R's and 6R's deserve their bad reputation, is it fairly easy for someone with minimal skills (or better yet a trained watch mechanic) to dial in these movements to a more acceptable performance.    For background I spent more on a 1861 Speedy years ago, expecting that the advertised 0-15s/d  would probably perform more like 5-7s/d. In reality it's been closed to 2-4s/d. 
×
×
  • Create New...