Jump to content

Recommended Pocket Watch Starter Tools

LukeShoe
 Share

Recommended Posts

LukeShoe New Member

LukeShoe

Posted
Posted

Hello!  I am a noob and this is my first time posting on this forum.

 

I have been watching Wristwatch Revival on YouTube for quite a while now and have found the videos quite fascinating.  As a result, I have decided to try my hand at disassembling and cleaning a mechanical movement.  In one of the videos, it was recommended to start on pocket watches since things are a little larger to work with but represent the same idea and process for cleaning and repair.

 

I will start with a cheap China pocket watch from Amazon to disassemble & reassemble a few times to get my feet wet and hone my hand-eye coordination but after that, I want to move to cleaning one I got on eBay (see below).  It's in decent shape, so I would eventually like to use that one for my Sunday morning attire at church and the occasional wedding.

 

With all of that said, what size screwdrivers do I need?  I assume they can have larger tips than a wristwatch size but what does that translate to?  I am on a bit of a budget and so I don't want to buy a $200+ set to see if I enjoy doing this.  I have noticed that a lot of people are saying that Bergeon is the best but is there a cheaper brand with a hardened tip set or even just 2 (?) sizes (for now) of screwdriver that would do the job?  Also, tweezers.  Any top two recommendations with pocket watch size parts in mind?

 

Does a movement manual, if there is such a thing, have a list of tool sizes needed?

 

*I do have some very basic tool kit that my daughter got me from Amazon for Christmas to nudge me into giving this a try so I realize that screwdrivers and tweezers are not the only tools needed but these are the ones I don't have.

 

Has anyone ever worked with this movement before?

 

Is there a pocket watch forum/channel/store you recommend?

 

THANK YOU for your time and any tips or suggestions are greatly appreciated.

 

 

My pocket watch looks very close to this one (dial text is slightly different).  Turn your volume down, the video has loud music in the background.

https://www.youtube.com/shorts/-S_wym7jYFk

 

From what I can tell, (I opened the back cover to look) this is the Molnija 3602 Movement

https://17jewels.info/movements/m/molnija/molnija-3602/

Link to comment
Share on other sites
rjenkinsgb Watch Enthusiast

rjenkinsgb

Posted
Posted

You can get a Bergeon 30081-p05 screwdriver set for around £40 new if you search suppliers; that's the one I got and I'd highly recommend it! It's far better that the cheaper ones I tried before.

It has six sizes, from 0.8 to 1.6mm & should cover most normal watches as well as pocket watches.

I've also added a 0.6mm from the same series, for some very small wristwatch movements.

 

Link to comment
Share on other sites
Bonefixer Watch Enthusiast

Bonefixer

Posted
Posted

As a relative newbie myself I’d recommend this:

Decent tweezers - as soon as I upgraded my £10 set of 7 tweezers for a single pair of Dumont’s my parts stopped pinging, and I was suddenly able to do everything much more effectively. 
 

Screwdrivers - my first set were a midrange set from Amazon - 0.8 - 2.5mm. They were fine, about £50. 
 

You can keep spending and spending on more tools. But don’t skimp on the basics. 

  • Like 1
Link to comment
Share on other sites
VWatchie Distinguished Member

VWatchie

Posted
Posted (edited)
22 hours ago, LukeShoe said:

I will start with a cheap China pocket watch from Amazon

If you can link to it we could have a look and give you our opinions!

EDIT:

Sorry, missed the link. I'd recommend a Unitas 6497 or a Chinese clone Seagull TY3600. When you start out you want Incabloc anti-shock springs as they are the easiest to handle. Quite often you can find genuine Unitas movements for not much money on eBay in pocket watches. For example: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2332490.m570.l1313&_nkw=196326170759&_sacat=0 

Also, if you later want to design your own watch around a Unitas 6497 you find tons of options, cases, hands, dials, on eBay.

Edited by VWatchie
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • thor447
      Case needed a lapping machine....So I improvised - Results are amateur but promising

      By thor447 · Posted

      Since I couldn't slow the machine down enough for my liking, I started off slowly with a higher grit.  I began (very lightly) with 1000 grit paper: https://www.amazon.com/gp/product/B07DTJBND1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Finished with 3000 grit: https://www.amazon.com/gp/product/B07DTFSMT1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Afterwards I went on to polish with traditional methods using felt & cotton wheels, with different grades of Dialux. Hope this helps.
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Ok so there is barely any response happening . After this last attempt i think I'm just going to give up on it because very few seem genuinely interested or even bothered or worried what may happen in the future. ( if someone can set me straight I'd love to hear it ) I would think anyone into watches has heard of Roland Ranfft, how they grew to love and depend upon his site for detailed information. And not just that, he also had a view about Ebay and everyone that visited Roland's site knew exactly what he thought about Ebay, Roland's site also had a secondhand watch sale side to it.  If anyone here could have done anything to preserve his site and keep it exactly the way it was.........Would you have done something to make that happen ?  Its been pointed out to me but not in so many words  that I'm probably coming across as an insensitive p.rick, truly I'm sorry about that, i say it as it is but no malice is intended and yes clearly I'm putting my forum membership on the line here. I'll happily shut up about it now, I've done all i can.
    • grenert
      A see-through vintage Swatch! Service walkthrough of a ETA 2842 with Video

      By grenert · Posted

      Thank you so much for posting this!  Although this movement is serviceable, there are no service notes that I've been able to find.  This is a great alternative!
    • rjenkinsgb
      Learning Watch repair maintenance

      By rjenkinsgb · Posted

      Greetings from another electronics designer & programmer!   I suggest you get a batch of similar scrap movements from ebay - I found batches of Seikos very cheaply, I got seven of one type for £11 (or 11 Euros possibly?). Those were ladies, 4206B I believe. There are also mens movements at a slightly higher price; eg. https://www.ebay.co.uk/itm/134723051997 https://www.ebay.co.uk/itm/235565276549 They are cheap enough so it does not matter what gets messed up or lost & you can probably still get one or two working movements from a batch, even if some part are damaged when you get them. (I've had quite a bit from the guy in Holland, he usually has a good range of movements).  
    • Neverenoughwatches
      Favourite timepiece.

      By Neverenoughwatches · Posted

      Please OH, we should all be proud of our collections what ever they are. If we can't show them off here then we can't show them anywhere. Our favourite gives us a story to tell of why we love it, that story also tells others something about ourselves. These are some of the things that make our forum and our community so amazing .
×
×
  • Create New...