Fitting the glass back in the case

[LuigiMeister2800]

Hi everyone,

I removed the glass from the case (I did not think this through I guess  ) but am wondering how on earth you get it back in.

Is it possible without some sort of press or do I really need a press? 

 

Thanks

[HectorLooi]

Please provide more information like the make of the watch, the typevof glass, etc. Photos would help greatly.

[CYCLOPS]

does it have a gasket or is it glued in, is there a bevel on one side? you will probably need a press of some sort....

[LuigiMeister2800]

It is a Union Soleure small seconds Incabloc.

The case is made up of the glass which I pressed out of the bezel/top part of the case.

I could post a picture later but at work right now and I don't have it with me. 

To remove the glass from the case I just had to push from the inside and it snapped out. No gaskets or anything...

Edited February 12 by LuigiMeister2800

[CYCLOPS]

scrape the old glue out, clean, then re-glue with UV glue if no gasket....

Edited March 24 by CYCLOPS