-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
Dial needs removing to get to the keyless for inspection. Worn or broken setting lever, or just springs weak press on set lever. -
By Neverenoughwatches · Posted
I use copper strand wire from 1mm flex cable finishes at 0.1 mm , bend it to whatever shape you like to fit around components -
Shouldn't push on the movement, use the case to pry the ring out. Attention, details of advice by clockboy.
-
I just found 2 things about this topic: 1) from personal testing with aluminum foil in small jars of both the cleaner and the rinse, I found no reaction; 2) I reached out to Zenith Solutions corporate contact information and they confirmed that their products do not react with aluminum. -
By watchweasol · Posted
Hi @transporter the line is the purchased line not fishing line. Being an angler having done both trout ans sea. This stuff is waaaay too stiff tying a knot takes a time. 0.60 line transparent so as to be invisible when in use. The escape wheel is 100 percent ok, checked out..the problem is the shape of the exit pallate causing the jump the clock runs perfectly well. -73 secs a day .
-
.thumb.jpg.855ec4d2c6a843b0981b824425517bf8.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.