Jump to content

Chronograph watch movement fails to start after after battery replacement (Seiko VD53B and Miyota OS10)


Recommended Posts

Hi, first post as new to tinkering. 

I have 2 watches, both chronograph, and in both cases after replacing the battery the watch does not run but the chronograph works. This suggests it's not a battery or contact problem. The stem does move the date and hands as normal.

One is Rotary Aquaspeed with Seiko VD53B movement. I tried shorting the AC to the battery and the main spring clip (right name?),as recommended in several online PDF movement manuals and forums, to no avail. This watch was in current use.

The other is a Quantième with a Miyota OS10 movement. This has less online info than the VD53x series, and I can't find an AC terminal to try a reset. This has sat unused in a drawer for 10yrs+ and I was looking to pass it to my son.

Am I doing something wrong to have 2 fail on battery change. I just remove and replace, moving retaining spring out of way in process. Is there some reset trick I've missed? I can't see how I could have dislodged any gears, the movements have not been removed from the cases (yet).

Many thanks in advance for any suggestions!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Interesting interpretation of "traditional". I would say that Loctite is definitely the up-to-date and appropriate stuff to use, however, it is a relatively modern solution. Before the advent of such esoteric solutions I believe that the "traditional" thread locker of choice may well have been a sugar solution. Once applied the water would evaporate and the sugar would crystalise, locking the threads tight.
    • @steve1811uk close but no cigar 🙂 I don't smoke anyway. I checked in my stock of parts and that's the closest I got to your dimensions. Good luck in your search. @RichardHarris123 I have an accumulation of all sorts of odds and ends that I acquired as a result of buying up the tail ends of old watchmakers estates. Usually after all of the great stuff has been stripped out, which means that the sweepings off of the workshop floor can be had for peanuts, but if you have the patience, can often be found to contain gold (both literally and figuratively 🙂 ). These came to me through on of those purchases. I doubt that I will personally be able to make use of even 10% of my accumulated stock, but having it, and knowing what I have, means that I can at least pass bits on to those who can use it whenever possible.
    • Hi and thank-you for your suggestions, as per Mark's instructions I checked my browser "Safari" and spell check and grammar was not ticked. So all sorted. Thanks CJ  
    • As an alternative, clear nail Polish, the advantage is you can have a manicure at the same time. 
    • I use Grammarly. It works really well and If English is not your first language, you will also receive help with formulations. There is a free version that covers most of my needs. It installs as a plug-in and works with all browsers and word processors.
×
×
  • Create New...