Jump to content

Hamilton 974 stuck case ring screw

JackH
 Share

Recommended Posts

JackH Watch Enthusiast

JackH

Posted
Posted

I have been trying to disassemble this Hamilton 974 pocket watch and have run into a screw wanting to stay in the ring. The ring is just below the dial and there are three screws that attach it.  I was able to get two of the screws out. The remaining screw is not rusted or corroded, it spins freely and I hear a click when unscrewing it. It is not stripped and tightens down easily. The screw head seems to be a bit tight for me to remove the screw. I have tried rodico and gravity but it seems to want to stay in the ring. If anyone has any ideas on how to get this out, I would appreciate it. My experience is mainly with wrist watches. This is my first pocket watch and I do not want to damage anything.

Thanks,

John

Hamilton Face.jpg

Hamilton case.jpg

Hamilton screw.jpg

Link to comment
Share on other sites
JackH Watch Enthusiast

JackH

Posted
  • Author
Posted

I will give that a try. Thanks for your help!

I was able to remove the screw. (I did not realize that they were dial screws). There were four of them but only three are used for the dial feet. I was able to carefully remove the dial and then slip a pin in the dial foot hole and move the screw out.

I will be sure and polish the screw when re-assembling it so it does not happen again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Case Tube Tool - Quest for one that works

      By Neverenoughwatches · Posted

      Now thats a real man's tool press 👍. I have one just like it in my back garden for when just CANT fix a watch . Its not something i have had to do yet, @Waggybut wouldn't any type of press be able to do this ? What about an adapted chain link  extractor work or a micrometer with some sleeve pushers made to slot over the ends. @Waggy Found something that could work Scott, comes with different size pins and pushers. Only bit that would need making is a round former to support the inside of the case, a piece of stout timber, bit of oak or mdf might do it. What i like about this one is the pin is pushed in, its in a sliding sleeve so it doesn't turn while its being driven. This has 4 pin sizes and 3 stumps as well so it will come in for other applications, the pins could be adapted to take other accessories from jewelling tools. I've just ordered one myself for some play time. 
    • Mperss920
      Seiko 6309a diver crown replacement

      By Mperss920 · Posted

      So I purchased this one based on my case number being listed. (Unless my case number is incorrect. The last digits are faint)
    • HectorLooi
      Case Tube Tool - Quest for one that works

      By HectorLooi · Posted

      I have the same tool from AliExpress and get the same anxiety when when using it. But you have to admit it looks awesome on your tool shelf. Makes you look like a pro. 🤣 Looking at the photo of the Horotec tool, it looks equally flimsy. It probably comes from the same factory. I was thinking of using the pushers supplied with the tool and making a hand tool from a cranked jeweller's punch. I'll grind off the tip of the punch and drill a hole at the end to fit the pusher in. The cranked shank would be able to clear the watch case give a straight in-line axis to exert force to tap the pendant tube out. Should be robust enough to last several lifetimes. I wonder why nobody makes it. 🤔
    • VWatchie
      “Professionally” serviced, I promise. Zenith 146HP

      By VWatchie · Posted

      It reminds me of Ukrainian eBay sellers of Russian watches. More often than not the listings include the phrase "Serviced by Master Watchmaker". Of course, they never are, and it should be expected. It's the most corrupt country in Europe, definitely on par with Russia. Today our tiny country (Sweden) sent them another $1 232 255 518 with no accountability whatsoever for how the money will be used.
    • oldhippy
      Case Tube Tool - Quest for one that works

      By oldhippy · Posted

      Now that is taking it a bit far. You are going to need a bloody big workshop.  
×
×
  • Create New...