Jump to content

Dial for Hamilton Sea Breeze III

BelvidereWoods
 Share

Recommended Posts

BelvidereWoods New Member

BelvidereWoods

Posted
Posted

Hello, all. I'm in search of a dial to fit a Hamilton 806 movement. The watch is, I believe, a "Sea Breeze III" from the 1970's, manual wind, time only. The original dial diameter is 29.5mm and the dial feet are quite close to the edge, app. 24mm apart on center. The dial feet are positioned at app. 11' and 41'. If you have or come across a dial like that I would be interested in purchasing one. Thank you.

In case you're curious, this watch was gifted to me by a well meaning friend who found it in an antique shop. She didn't look very closely at it and failed to notice that the dial had been "customized" (defaced, more like,) with a highly offensive racist logo. Why the antiques dealer felt it was appropriate to offer this item for sale in the first place is another story. I would just return the watch but I don't want to embarrass my friend who I know would be mortified. So if possible I would like to find a clean dial and get the watch back into service. 

Any help would be very much appreciated.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • xdandeman
      Introduction: Bob Smith USN (ss) and dadd'y Elgin

      By xdandeman · Posted

      Nice file  Just got old pocket watch in and tools,  can I get it back together or should I give up.  we'll see  thanks for the info
    • Roll1ex
      Greetings from India.

      By Roll1ex · Posted

      @HectorLooi Yes, I would say that Mumbai has the highest liquidity in terms used watches. How was your experience with these used watches and what watch brands did you buy used? I have always found the vintage luxury watch segment in India a bit shady. Quite a few are genuine watches with genuine matching parts but just not from the same one.
    • Marc
      Seiko 6309a diver crown replacement

      By Marc · Posted

      Interesting interpretation of "traditional". I would say that Loctite is definitely the up-to-date and appropriate stuff to use, however, it is a relatively modern solution. Before the advent of such esoteric solutions I believe that the "traditional" thread locker of choice may well have been a sugar solution. Once applied the water would evaporate and the sugar would crystalise, locking the threads tight.
    • Marc
      Pocket watch winding stem sleeve

      By Marc · Posted

      @steve1811uk close but no cigar 🙂 I don't smoke anyway. I checked in my stock of parts and that's the closest I got to your dimensions. Good luck in your search. @RichardHarris123 I have an accumulation of all sorts of odds and ends that I acquired as a result of buying up the tail ends of old watchmakers estates. Usually after all of the great stuff has been stripped out, which means that the sweepings off of the workshop floor can be had for peanuts, but if you have the patience, can often be found to contain gold (both literally and figuratively 🙂 ). These came to me through on of those purchases. I doubt that I will personally be able to make use of even 10% of my accumulated stock, but having it, and knowing what I have, means that I can at least pass bits on to those who can use it whenever possible.
    • Curare
      Spell Check

      By Curare · Posted

      Hi and thank-you for your suggestions, as per Mark's instructions I checked my browser "Safari" and spell check and grammar was not ticked. So all sorted. Thanks CJ  
×
×
  • Create New...