Jump to content

Strange marks on case-back


Recommended Posts

Just had an eBay purchase arrive, an Enicar military style, so I thought I'd have a quick look. When I took the case back off I noticed some strange marks, almost like the metal had been discoloured due to heat. However, if you kind of squint at it the almost look like letters??? The movement itself is fine. Maybe some marker or ink that has degraded over time or reacted with moisture??

Any ideas out there?

Pictures below:

2023-07-19-18-33-58-460.thumb.jpg.5cf3337653512f415165017c4f2af4e1.jpg

2023-07-19-18-34-04-459.thumb.jpg.b3dc7288913ef112e15a59c7e7db1a9e.jpg

2023-07-19-18-35-21-206.thumb.jpg.7db6bcbf40e9e1fb12290cd3196b67cf.jpg

  • Like 2
Link to comment
Share on other sites

14 minutes ago, Waggy said:

Just had an eBay purchase arrive, an Enicar military style, so I thought I'd have a quick look. When I took the case back off I noticed some strange marks, almost like the metal had been discoloured due to heat. However, if you kind of squint at it the almost look like letters??? The movement itself is fine. Maybe some marker or ink that has degraded over time or reacted with moisture??

Any ideas out there?

Pictures below:

2023-07-19-18-33-58-460.thumb.jpg.5cf3337653512f415165017c4f2af4e1.jpg

2023-07-19-18-34-04-459.thumb.jpg.b3dc7288913ef112e15a59c7e7db1a9e.jpg

2023-07-19-18-35-21-206.thumb.jpg.7db6bcbf40e9e1fb12290cd3196b67cf.jpg

What be on tuther side of yon watchback matey ?

18 minutes ago, Waggy said:

Just had an eBay purchase arrive, an Enicar military style, so I thought I'd have a quick look. When I took the case back off I noticed some strange marks, almost like the metal had been discoloured due to heat. However, if you kind of squint at it the almost look like letters??? The movement itself is fine. Maybe some marker or ink that has degraded over time or reacted with moisture??

Any ideas out there?

Pictures below:

2023-07-19-18-33-58-460.thumb.jpg.5cf3337653512f415165017c4f2af4e1.jpg

2023-07-19-18-34-04-459.thumb.jpg.b3dc7288913ef112e15a59c7e7db1a9e.jpg

2023-07-19-18-35-21-206.thumb.jpg.7db6bcbf40e9e1fb12290cd3196b67cf.jpg

The owner's initials. Oswald Clutterbuck ?

Link to comment
Share on other sites

3 hours ago, Galilea said:

Perhaps someone burned something like incense in it, or used it for heating or melting something unhealthy. I have a nephew who has spoons that are similarly discolored. 🤭

The caseback was on pretty tight, I needed to use a special tool to free it up, so I can think of easier ways to heat stuff up eg spoons, hence, I suspect @oldhippy was correct and it is some kind of ink that has degraded over time, wen I get home from work I'll try to remove it with acetone which will confirm if it is some kind of ink or heat effect. The good news is that the movement doesn't seem to be effected 🙂

Link to comment
Share on other sites

48 minutes ago, Waggy said:

The caseback was on pretty tight, I needed to use a special tool to free it up, so I can think of easier ways to heat stuff up eg spoons, hence, I suspect @oldhippy was correct and it is some kind of ink that has degraded over time, wen I get home from work I'll try to remove it with acetone which will confirm if it is some kind of ink or heat effect. The good news is that the movement doesn't seem to be effected 🙂

Of course @oldhippy and you are likely to know. I happen to associate war with hard drugs, trenches and limited resources, and this is a military watch I think you said. Forgot to say first time: nice looking watch. I wish I had one lol.

  • Thanks 1
Link to comment
Share on other sites

57 minutes ago, Waggy said:

The caseback was on pretty tight, I needed to use a special tool to free it up, so I can think of easier ways to heat stuff up eg spoons, hence, I suspect @oldhippy was correct and it is some kind of ink that has degraded over time, wen I get home from work I'll try to remove it with acetone which will confirm if it is some kind of ink or heat effect. The good news is that the movement doesn't seem to be effected 🙂

Its through to the outside, ink wouldnt do that . Sorry just woke up .Actually was marked from the outside. The initials are J.C. 

Edited by Neverenoughwatches
  • Thanks 1
Link to comment
Share on other sites

3 minutes ago, Neverenoughwatches said:

The initials are J.C. 

 

3 minutes ago, Neverenoughwatches said:

Its through to the outside, ink wouldnt do that . Sorry just woke up .Actually was marked from the outside. The initials are J.C. 

😲 Swiss stigmata?

  • Like 1
Link to comment
Share on other sites

7 minutes ago, Galilea said:

Of course @oldhippy and you are likely to know. I happen to associate war with hard drugs, trenches and limited resources, and this is a military watch I think you said. Forgot to say first time: nice looking watch. I wish I had one lol.

Its not military Ness, the case shape is different for that much heavier. Just military style, trying to copy some way with a black face .

4 hours ago, Galilea said:

Perhaps someone burned something like incense in it, or used it for heating or melting something unhealthy. I have a nephew who has spoons that are similarly discolored. 🤭

It looks more like it was engraved and the heat from that has scorched the inside, but definitely marked from the outside.

16 minutes ago, Galilea said:

 

😲 Swiss stigmata?

 

Screenshot_20230720-064941_Samsung Internet.jpg

12 hours ago, Waggy said:

Here you go

IMG_20230719_222843.thumb.jpg.92a076bda09d2205fbbf0ec800ed0bb3.jpg

 

13 hours ago, Waggy said:

Just had an eBay purchase arrive, an Enicar military style, so I thought I'd have a quick look. When I took the case back off I noticed some strange marks, almost like the metal had been discoloured due to heat. However, if you kind of squint at it the almost look like letters??? The movement itself is fine. Maybe some marker or ink that has degraded over time or reacted with moisture??

Any ideas out there?

Pictures below:

2023-07-19-18-33-58-460.thumb.jpg.5cf3337653512f415165017c4f2af4e1.jpg

2023-07-19-18-34-04-459.thumb.jpg.b3dc7288913ef112e15a59c7e7db1a9e.jpg

2023-07-19-18-35-21-206.thumb.jpg.7db6bcbf40e9e1fb12290cd3196b67cf.jpg

Its a Durowe 422 1950s.  Enicar did make miltary spec watches. Even though this isn't doesnt mean to say it wasn't used in the military, soldiers  often wore their own.

  • Thanks 1
Link to comment
Share on other sites

As it is also on the out side, how ever the e

1 hour ago, Neverenoughwatches said:

t looks more like it was engraved and the heat from that has scorched the inside, but definitely marked from the outside.

I agree but there is no sign of heat on the outside or any sign of buffing on the back. Could be one of life's little mystery's.  

Link to comment
Share on other sites

3 hours ago, oldhippy said:

As it is also on the out side, how ever the e

I agree but there is no sign of heat on the outside or any sign of buffing on the back. Could be one of life's little mystery's.  

I thought maybe one of those small engraving pens might just generate enough heat to tranfer a scorch mark to the inside. 🤷‍♂️

Link to comment
Share on other sites

2 hours ago, Neverenoughwatches said:

Best guy to speak about Enicars and to watch is Matt from Horology Biology. 

Small world, that's the reason I got this one, he seems to love them, so I thought I'd get one to see if I agreed with him. I also created a post on this forum on watches flying under the radar, so I'll add this brand as one such sub-radar brand if I agree with Matt.

Link to comment
Share on other sites

Most definitely heat markings from the engraving on the outside of the caseback. The gradient of the colours perfectly match the colouring reaction of steel across increasing temperatures. Blue at the hottest point (the actual initials), surrounded by purple, then red-brown, then yellow-beige. See the image below. 

Probably engraved it, and polished away the discoloration of the steel on the outside, but not the inside.

image.png.9480a86377e40fffe988467b7e6dbb0f.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • From the photo the pallet arm looks as if it has been tampered with the edges are not nice and straight this can cause problems on the banking pins. 
    • Update, I discovered that I could change the mainspring by removing the arbor and sliding it out from between the front and back plates. So I put a new mainspring in. This it what I  get over a 7 day period After winding                                          amplitude is 1 1/2 turns plus a few degrees.                                                                        ie just over 1 1/2 turns. 1 day after winding     gained 1 sec      no amplitude check. 2 days after winding   gained 1 sec      amplitude 1 1/2 turns                                                                                                              i.e. it lost the few extra degrees 3 days afer winding    gained 3 sec     no amplitude check 4 days after winding   gained 5 sec     amplitude 1 1/2 turns                                                                                                               i.e. unchanged 5 days after winding   gained 7 sec     no amplitude check 6 days after winding   gained 16sec    amplitude just over 1 1/4 turns 7 days after winding   gained 24sec   amplitude 1 1/4 turns. From  Based on video inspection, I am getting full pallet lock. So, my data seems to be at odds with the statement "swing of a balance wheel has nothing to do with the rate". However, I have noticed the banking posts are not controlling the lever position on the right side.  I may have some work to do here.
    • I can't tell whether or not some stem is stuck in the crown, I  think so though.  If the crown is stainless steel you could try alum to disolve the stem of try drilling it out. If all else fails, buy a new crown. 
    • Does anyone use the x5 eyepieces,  when i use them on my different amscope , the magnification changes to x5 but the field of view remains exactly the same as the x10, so nothing gained. The optical lenses can't be swapped out or at least they are not available as far as i know. 
    • I think maybe we're all a bit dim @ManSkirtBrew 🤣 99% of the time I'm working with the 0.5X Barlow, so mags from 3.5X to 22.5X. When I need a close up of a pivot or jewel, I take the Barlow out, and even put in the 2X Barlow, but it's a nuisance. So like you, I had that D'oh moment, why don't I just use 20X eyepieces (WF20X/10). They take seconds to change, and you keep the working distance. The only downsides are lower field of view, and less brightness.  
×
×
  • Create New...