Jump to content

MKS staking tool query

Bluescrew
 Share

Recommended Posts

Bluescrew Member

Bluescrew

Posted
Posted

I've recently seen an MKS staking tool for sale. It looks reasonably complete except that it's missing the small slot headed screw located in the side of the tool towards the top - please see the attached image of another member's tool.

I'd be interested to know what function this screw performs. Can the tool be used without it or is it needed to properly adjust the fit of the stake?MKSTOOL.thumb.JPG.3e0355b2f2cb2a982118f81102146942.JPG.

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
2 minutes ago, Bluescrew said:

I'd be interested to know what function this screw performs. Can the tool be used without it or is it needed to properly adjust the fit of the stake?

Thats a locking screw for the cam adjustment that the stake fits into. If the cam doesn't lock,  the stake can move off centre and not line up with the base holes. You should be able to source a locking screw.

  • Like 2
Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi the round anvil has a little play but when tightened by the black screw at the Side it’s fixed  the punch guide that the set screw locks is eccentric to allow for alignment of the cantering punch, aligning the head and the anvil.  Set the anvil first then the punch guide.

 Alteratively the other way round the i Portman thing is the alignment.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Ok so there is barely any response happening . After this last attempt i think I'm just going to give up on it because very few seem genuinely interested or even bothered or worried what may happen in the future. ( if someone can set me straight I'd love to hear it ) I would think anyone into watches has heard of Roland Ranfft, how they grew to love and depend upon his site for detailed information. And not just that, he also had a view about Ebay and everyone that visited Roland's site knew exactly what he thought about Ebay, Roland's site also had a secondhand watch sale side to it.  If anyone here could have done anything to preserve his site and keep it exactly the way it was.........Would you have done something to make that happen ?  Its been pointed out to me but not in so many words  that I'm probably coming across as an insensitive p.rick, truly I'm sorry about that, i say it as it is but no malice is intended and yes clearly I'm putting my forum membership on the line here. I'll happily shut up about it now, I've done all i can.
    • grenert
      A see-through vintage Swatch! Service walkthrough of a ETA 2842 with Video

      By grenert · Posted

      Thank you so much for posting this!  Although this movement is serviceable, there are no service notes that I've been able to find.  This is a great alternative!
    • rjenkinsgb
      Learning Watch repair maintenance

      By rjenkinsgb · Posted

      Greetings from another electronics designer & programmer!   I suggest you get a batch of similar scrap movements from ebay - I found batches of Seikos very cheaply, I got seven of one type for £11 (or 11 Euros possibly?). Those were ladies, 4206B I believe. There are also mens movements at a slightly higher price; eg. https://www.ebay.co.uk/itm/134723051997 https://www.ebay.co.uk/itm/235565276549 They are cheap enough so it does not matter what gets messed up or lost & you can probably still get one or two working movements from a batch, even if some part are damaged when you get them. (I've had quite a bit from the guy in Holland, he usually has a good range of movements).  
    • Neverenoughwatches
      Favourite timepiece.

      By Neverenoughwatches · Posted

      Please OH, we should all be proud of our collections what ever they are. If we can't show them off here then we can't show them anywhere. Our favourite gives us a story to tell of why we love it, that story also tells others something about ourselves. These are some of the things that make our forum and our community so amazing .
    • Terrinecold
      First movement = First broken movement

      By Terrinecold · Posted

      I can take pictures when I am home of what it looks like.  They will be phone picture as I don't have a camera in my microscope yet but I should be able to take a few views to give a good idea of the damage.
×
×
  • Create New...