Jump to content

Bent 4th wheel pivot?

RichardHarris123
 Share

Recommended Posts

RichardHarris123 Distinguished Member

RichardHarris123

Posted
Posted

Hello all.  

My Cyma 775 is finally running.  Not brilliantly at plus two minutes a day but running.  However it won't run with the second hand attached, I'm assuming that the 4th wheel pivot is bent after it passes through the jewel. Thought's?

Struggling for time at the moment. 

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
2 hours ago, RichardHarris123 said:

No, even if it's not touching it won't run. 

No, even if it's not touching it won't run. It maybe rubbing. 

Can you try attaching the subdial second hand without the dial on. You might be able to see what's happening under the dial. If it runs then add the hour and minute hand and see if that also runs. This might draw your attention to dial fouling. 

  • Like 1
Link to comment
Share on other sites
RichardHarris123 Distinguished Member

RichardHarris123

Posted
  • Author
Posted
9 minutes ago, Neverenoughwatches said:

Can you try attaching the subdial second hand without the dial on. You might be able to see what's happening under the dial. If it runs then add the hour and minute hand and see if that also runs. This might draw your attention to dial fouling. 

Excellent advice, I'll try it. Thanks. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      Bulova Accutron 2181 - had an open coil I managed to bring it back into life. Longines 9L - not serviced just pics   Eterna-Matic Centenaire "61" - 1438U - not serviced just pics. Longines Cal 431 - not serviced just pics Lemania Cal 4650 - not serviced, just pics.
    • watchweasol
      Citizen Technical Info

      By watchweasol · Posted

      attached is the tech /parts sheet. .   Can one ask how come it’s full of water. After being told that the waterproofing was not guaranteed.  Problem being electronics don’t mix especially withe the power source being attached.  You may be lucky but I should look out for a replacement movement or working donor to rob the movement from. C720.pdf
    • JeremyLaurenson
      Breitling Navi Heritage (ETA 2892A2) seconds subdial skippiness...

      By JeremyLaurenson · Posted

      I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • Giogrlj
      Unknown mechanism

      By Giogrlj · Posted

      A friend of mine just gave me an old pocket watch. The case is in very bad condition but the movement itself seems to be in a quite good shape. I can't identify which movement is this, since I have to find a missing winding stem. I attach few photos in a case somebody would be able to give some hints.  Thank's folks
    • WatchesFarm
      How to recognize radioactive watches.

      By WatchesFarm · Posted

      Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
×
×
  • Create New...