Jump to content

Dogma w.watch

ladikr

By ladikr
in Identify This Movement or Watch

 Share

Recommended Posts

ladikr New Member

ladikr

Posted
Posted

good, I bought this Dogma watch, it is in good condition and fully functional, the tension reserve is nice, only the shaft with the crown was broken, but it has already been repaired, I date this watch around 1940-45 correctly? I think it is an ETA 853?IMG_20221229_170049.thumb.jpg.7bf563af6403d1a96bf03dab259416ae.jpgIMG_20221229_144623.thumb.jpg.24a35b4cfd5cb3e130950e970da052f9.jpgIMG_20221230_083754.thumb.jpg.96660d3ff19c376049061d37b2788437.jpg

watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi  Have a look at the "ranfft eta 853"  on Dr Ranfft's web site,  Have a look under the balance for a caliber number and makers mark as the eta 853 published by Ranfft does not look like yours.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Is it possible to straighten this pivot?

      By Neverenoughwatches · Posted

      I've noticed that some things are shipped from my country as well. Unlikely you will use any of the drills under 0.4mm, 0.4 seems about right for most re-pivot work for average watch sizes. Besides 0.3mm and under are extremely fragile and I found near impossible to sharpen, the flutes are so shallow and it's difficult to determine where to start grinding in the cutting and clearance angles once you've broken them.  The cheap ones with the coloured size indicator collars have worked for me, though these ones might be  better quality, they are 3x the price of the others.  You guys really have to pay through the nose for this stuff. It would be interesting to find out how much cheaper it would be for you, if we acted as a go between .
    • AndyGSi
      Bulova Rubaiyat 1920/21

      By AndyGSi · Posted

      Sorry for the confusion but I was referring to the stud staying in the hole in the barrel.
    • bosstaki
      Watch keeps stopping after battery change

      By bosstaki · Posted

      Hi guys! I’ve just changed a watch battery for a friend of mine & he says it keeps stopping on him when he puts it on to go out, he says if he takes it off a pulls the crown & puts the crown back in the starts working again! Any ideas please! 👍
    • JohnL
      Worn mainplate under crown wheel

      By JohnL · Posted

      Sorry, when I said lift up: it tilts, lifts up on the side where the winding pinion is so the teeth no longer engage, down on the side where the mainplate is worn. I think it's worn there more than is immediately apparent in the photo; it's a bit dark.   I shall get some photos of the crown wheel 😉 It's a Poljot 2614.2H. There is perhaps a bit of slop around the bushing, and some of the teeth may be slightly worn on the underside of the crown wheel. I'm not sure that if those issues are addressed it will fix the problem. I get the impression that having no support under one side is a bit of a design flaw that's asking for trouble. 
    • GPrideaux
      Bulova Rubaiyat 1920/21

      By GPrideaux · Posted

      The stud has a neck that is a little smaller in diameter than the end and the hole is keyhole shaped so the stud locks in and I wouldn't need to worry about the thickness of the tail pulling it out of the hole. It might be possible to remove the stud from the existing spring, but I don't know how I'd go about doing that in such a way that it would be reusable. Maybe work around it squeezing with pliers until the riveted end became small enough to pass through the spring? A few more higher magnification pics of the pin/stud:
×
×
  • Create New...