Omega 175.0032/175.033 sub hands

[Chrono15]

Hello all,

Does anyone know where I could find sub hands for the Omega 175.0032? It's the dubois/Eta based Omega movement. All 3 sub hands are the same post size and length at .20mm and 4mm in length.  

I have 2 here with cracked paint on the hands when they were removed, and slight deformation on the edges from using hand levers. 

[Delgetti]

Hello, had the same problem, couldn't find anything on the net and Omega of course wouldn't sell those to me.

https://www.cousinsuk.com/product/subsidiary-dial-by-size

I think these hands (Type C) are the best choice in this case. Only 3.5 mm long, but as the original hands are a little bit too long (regarding the tots) this is ok. I worked with these hands on several chronos in the past and the hole size of the parts was always a lottery. So as they are cheap I would buy 3 sizes (0.17, 0.20, 0.26) and rub them up until they fit perfect.