Jump to content

Chunky golden nugget

Bearman
 Share

Recommended Posts

Bearman WRT Addict

Bearman

Posted
Posted

Good evening,

I thought I'd share my latest achievement. I'd been building up courage to take on a day/date watch after my previous success with an automatic. This unloved golden nugget came to me as a non runner and fairly grubby.  With one of those Russian Slava 2428 movements with the double spring barrel arrangement.

Thanks to my cheap ultrasonic cleaner and the great advice I received on the forum to safely polish it. It buffed up a treat. Sadly the innards had suffered from an excess of oil, which had damaged the balance spring, and the day wheel, where the painted finish has started to lift off. It also affected a small area of the dial. Though everything else was well preserved in the oil and gunk. In my short time tinkering, is this a common problem others come across?

I found the trickiest part was the shock jewel springs. After setting time aside to only tackle these on an evening and nothing more. I managed to get them back on with a combination of tweezers and a sharpened toothpick. I had a hell of a time with even the finest pointed tweezers.

The problem is I'm not brave enough to wear it out of the house. It's too extravagant for me, I may view it differently when I get round to finding a better strap than the cheap canvas one its sporting.

 

Chunky_golden_Russian.jpg

Damaged_day_wheel.jpg

Chunky_golden_Russian2.jpg

  • Like 1
Link to comment
Share on other sites
spectre6000 Distinguished Member

spectre6000

Posted
Posted

Lol! I can relate. The first watch I successfully rescued (though technically I still need to order a stem and crown) is a big 70s gold bling bomb with a green dial. I have been calling it the "leprechaun pimp" watch. It's hideous, but after all that work and finally succeeding... It's really just too hideous.

Link to comment
Share on other sites
Bearman WRT Addict

Bearman

Posted
  • Author
Posted

Thanks Spectre, I'd love to see the "leprechaun pimp" watch if you've a photo by way of a comparison. Unless it's too hideous its an offence to watchdom! Despite the looks of my "golden nugget" I'm pleased nonetheless with my success. Out of all the watches I've tinkered with this one by far keeps the best time. 

I'll have to wear it in secret, unless there's a 1970's fashion revival at which point I'll fit right in. 

Link to comment
Share on other sites
Bearman WRT Addict

Bearman

Posted
  • Author
Posted

Love the green dial, with those white hands it's got a minty thing going on. It's begging for one of those gold elasticated straps.

When you finish it, wear it with pride, possibly when no ones looking. Still building up courage to wear my one. Certainly a conversation piece. ?

Link to comment
Share on other sites
  • 7 months later...
Stretch Watch Enthusiast

Stretch

Posted
Posted
On 3/18/2021 at 8:33 PM, Bearman said:

Good evening,

I thought I'd share my latest achievement. I'd been building up courage to take on a day/date watch after my previous success with an automatic. This unloved golden nugget came to me as a non runner and fairly grubby.  With one of those Russian Slava 2428 movements with the double spring barrel arrangement.

Thanks to my cheap ultrasonic cleaner and the great advice I received on the forum to safely polish it. It buffed up a treat. Sadly the innards had suffered from an excess of oil, which had damaged the balance spring, and the day wheel, where the painted finish has started to lift off. It also affected a small area of the dial. Though everything else was well preserved in the oil and gunk. In my short time tinkering, is this a common problem others come across?

I found the trickiest part was the shock jewel springs. After setting time aside to only tackle these on an evening and nothing more. I managed to get them back on with a combination of tweezers and a sharpened toothpick. I had a hell of a time with even the finest pointed tweezers.

The problem is I'm not brave enough to wear it out of the house. It's too extravagant for me, I may view it differently when I get round to finding a better strap than the cheap canvas one its sporting.

 

Chunky_golden_Russian.jpg

Damaged_day_wheel.jpg

Chunky_golden_Russian2.jpg

 

Link to comment
Share on other sites
Stretch Watch Enthusiast

Stretch

Posted
Posted

That is a Golden nugget!

Nice job.  definitly need to source a nice retro gold plated strap for it.

I'm interested in hearing about the cheap ultrasonic cleaner, as i do need to get one and should be able to justify the investment if its a cheap one. I can tell my wife i've purchased it to clean hers and my daughters jewelry. 😁

Link to comment
Share on other sites
Bearman WRT Addict

Bearman

Posted
  • Author
Posted

Thanks both, I've been thinking about a strap for a while now. Not a fan of those hair pinching elasticated ones from the era. Out of all the watches I've tinkered with over the last year or so it keeps the best time bar far.

Stretch, that's the exact same reason I used to justify my cleaner! It certainly made things that bit easier. Mine came from ebay around £30, I made sure it was mains powered with an adjustable timer. Used it loads with tiny jam jars containing the parts and cleaning fluid.

I've a number of other Sekondas which I've brought back to life, all with that 70s vibe. I'll have to get round to showcasing them....

 

Link to comment
Share on other sites
  • 3 weeks later...
Stretch Watch Enthusiast

Stretch

Posted
Posted

Hi Bearman, There are far too many cleaners to choose from, bit of a minefield for picking a rubbish one.  Any chance you can let me know the make and model of your ultrasonic cleaner, as i'd rather go with one that i know someone is using.

cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...