Jump to content

Recommended Posts

Posted

Hi all,

I am looking for help with an ALLAINE 25 jewels automatic with Incabloc movement. Movement marked F 4007. The calendar was stuck in one position with a sound when moved which sounded like loose parts. Taking the back off very carefully I found two very small parts, one was a U shaped spring and the other a small actuator arm. Can anyone help with an exploded parts diagram or point me in the right direction to fin one.

Its a nice watch in good condition, every thing else works and keeps good time.

Hope someone can help.

Many Thanks

Posted
3 minutes ago, Jonesey said:

Hi all,

I am looking for help with an ALLAINE 25 jewels automatic with Incabloc movement. Movement marked F 4007. The calendar was stuck in one position with a sound when moved which sounded like loose parts. Taking the back off very carefully I found two very small parts, one was a U shaped spring and the other a small actuator arm. Can anyone help with an exploded parts diagram or point me in the right direction to fin one.

Its a nice watch in good condition, every thing else works and keeps good time.

Hope someone can help.

Many Thanks

Voila!

https://www.cousinsuk.com/PDF/categories/924_Felsa 4007, 4007N.pdf

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Felsa_4007

 

Posted

 F4007 is a Felsa made work horse. Felsa made some vairiants in 30, 35 and 41 jewels as well.

We are lucky to have weasol here who will get a datasheet in a jif, if there is one available. 

Regs

Joe

 

Posted
2 minutes ago, Nucejoe said:

 F4007 is a Felsa made work horse. Felsa made some vairiants in 30, 35 and 41 jewels as well.

We are lucky to have weasol here who will get a datasheet in a jif, if there is one available. 

Regs

Joe

 

Forgot all about poljot, resourceful.?

  • Haha 1
Posted
20 minutes ago, Nucejoe said:

Forgot all about poljot, resourceful.?

Well, some people said that my posts are useless and the only aim is to win every day.

I say, they are wrong. I am simply learning from others and trying to help some people during difficult pandemic lockdown / curfew / social distancing / 14 days isolation time... But thinking of winning... Hmm. Is there any chance to receive The Order of Zolfaghar? 

  • Haha 1
Posted

Many Thanks to you both ,looking at the parts sheet the parts I have are marked 2575  which is the Jumper spring and 2576 is the Jumper. I have found that 2557 the Date indicator is missing which I think that is why it has not moved the Date indicator transferred 2557/1.

Many thank



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Photos and dimensions of the balance may help resolve if it's the same as the Marvel.
    • Mike, You have the correct hairspring, only needed is to replace it's collet. So suitable collet is needed. I would not use the one from the new spring, as it can be backup variant. But it is not a problem to source a collet with the proper size (at least if one has piles of movements for parts).
    • Yes, the steel (and iron) solders well, but good flux is needed. This will usually mean acid type of flux, and after soldering, the part must be well washed from the flux, which is usually done with base solutions that will neutralize the acid remains. Actually, I don't know the current state of the wheel, so I am not able to give correct advice. But yes, if needed, new pinion can be cut. No matter what material the cutting wheel is, it is needed to start with soft steel (O1 is OK). After cutting the leaves of the pinion, the work must be hardened and tempered and only then the rest of the work to be done.
    • I doubt that I know enough at this stage of my journey to impart anything useful. I have the Laurel here, with (finally) the back off.  I also looked on Yahoo Auctions, there is a seller at the moment with what they've listed as a Seiko Marvel balance staff, but I don't know if it's the right part for your watch. It seems you need the whole balance anyway, and I'm not seeing any of those for sale. There is a very trashed looking Marvel from another seller that might suit as a donor unit, but no photos even with the back off, and the crystal is missing. It doesn't look promising: the dial is severely corroded, so useful internal parts might not be salvageable.  https://auctions.yahoo.co.jp/jp/auction/w1112646076 https://auctions.yahoo.co.jp/jp/auction/o1185016360
    • You've been to Aladdin's cave I see! 👍
×
×
  • Create New...