Jump to content

Recommended Posts

Posted

As per usual with the wonderful Royal Mail shipping was razor fast of my Fusee from the UK to Canada. It arrived seven days after I purchased it.

 

Very very pleased with it so far. It is a hunk of a watch, 56mm across and 17mm deep and heavy. Lots of Sterling silver as it is a full hunter with cuvette. I won it for a silly price, still can't believe I got it for what I did. Perhaps the chipped sub dial, lack of glass and non functioning cover spring put people off. But the movement has been stripped, cleaned and serviced and runs like a good'un with a beautiful slow beat, much slower than my Omega.

 

It came with comprehensive instructions on winding and care and a 1 year guarantee which is amazing when you consider its 120 years old. Great seller.

 

As I look closer at the watch it is full of such pleasing details. The dial is hand painted which I was not expecting. I am guessing the railroad track is printed but you can see the brush strokes and line variation and thickness on the romans and lettering.

 

It is key wind and ket set and on following the instructions on opening I can see how the damage on the sub dial occurred at some point in its history. One opens the bezel at 6 O'clock and then pushes a tab to swing the movement out. I am betting someone used the key to do this at some point and it slipped. Anyway, that adds to the history of it, as do the minor "home made" engravings (MC you know who you are!)

 

I remember watching the wonderful Manx watchmaker Roger Smith explaining his watchmaking ethos and the reason why his watches are so three dimensional in homage to the English watch makers of old. Looking at this watch I completely understand now why he carries this on.

 

I find this a fascinating watch to hold, one can feel it tick as well as hear it. The silver warms quickly to touch and feels wonderful in the hand. I had thought of getting a glass for it, they can be had but I am rather fond of seeing the dial "naked" and there is a cover to protect it. I probably will, but not just yet.

 

This pocket watch makes you slow down. Fusee's are not known for accuracy by modern standards but I like that. Not everything has to be down to the last second or minute and this watch teaches me to slow down and be more methodical. From the winding (which is so smooth and quiet compared to my Omega) to the setting of the hands with the key.

 

It reminds me of the job I had as a child which was to go around to all the clocks in the house and wind and set them. I used to have a loop with a bunch of keys for the various clocks. I used to love that and now I am back to it with this watch.

 

Thanks for looking.

 

L1020326_zps149a28c6.jpg

 

L1020339_zps7f77cecc.jpg

 

L1020316_zps962a0c50.jpg

 

L1020315_zps69f30c64.jpg

 

L1020332_zpse01388dc.jpg

  • Like 1
Posted

Thank you Craig and Autowind. It really does come down to history more than accuracy of timekeeping with these pieces I feel. Craig every time I hold any of my vintage pieces it feels like I can feel the lives who owned them before. Also with the hand engraving its like a tiny piece of the engraver has been left in posterity to remembered by future generations.

Posted

Wearing the Fusee in conjunction with the Archer again today.  I must say the more I look at the movement the more I fall in love with how these watches were made in England a century and more ago. I just know an 18th century verge will join this one one day!

 

L1020373_zps00d35793.jpg

 

L1020372_zps3efc62d0.jpg

 

L1020366_zps708b3b99.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I did wonder about the feasibility of mixing two oils. I am guessing that 9010 / 9020 or HP500 / HP1300 would be a better mix than 9010 / HPxx. Some people might think that was heresy but I guess the only consequence is that you might have to service the movement again if you got a poor result. 
    • Believe me: I am aware how fortunate I am.
    • Yes, however, as you are just starting out, you can progress using Ronsonol lighter fluid (or equiv) to clean.  Use pegwood to clean all pivot bearings. Yes.  Some disagree with me.  I have many hundreds of dollars invested in multiple time graphers and vintage timing machines.  The phone app is just fine for a beginner. Probably just needs a good cleaning. My SWAG, is slim to none unless you own a 3D printer and can design and print a spacer Here is a re-cased Mickey Mouse watch I made using 3D printer...lol!!
    • Chances of fitting that movement into a modern case with pleasing results are not good unfortunately. Dial size, pinion height, the position of the stem relative to the thickness of the movement all play a role, so cases made for a specific movement are really only workable for that movement. If you have a lot of skill in 3D modeling you might find a way to make it work, but it would be a significant challenge. A case made for an ST36 would be gigantic in relation to the Benrus movement. A case made for something like a Seiko NH35 would be closer to a workable diameter, but most of those modern cases are made for automatic movements that are much thicker than vintage hand wound movements.
    • Thank you very much for the very helpful info, folks. A lot of reading to do! I do like the look of that ingersoll. I am in the UK, so I think moebius is more readily available than Elgin. I hear 8000 does the trick as a jack of all trades. Given the rather sorry state of the Benrus, if I get the movement to run (If wound, it ticks for about 2-5 seconds then stops. Give it a tap, it ruins again, then stops again), What are the chances that I'll be able to fit it into an ST36 case (perhaps with a 3d-printed adapter)? I don't think I'll have the spare cash to invest in case re-plating and dial re-finishing! I would really appreciate some info/links on how to clean the parts: is it achievable without a ultrasonic cleaner, or am I better off buying one and not wasting my time? Also, can I get away with a timegrapher app on pc/phone?
×
×
  • Create New...