Jump to content

Newbie quesyion

gary17
 Share

Recommended Posts

Jon Super WRT Addict

Jon

Posted
Posted (edited)

The spring size looks about right... 1/3 spring, 1/3 space and 1/3 arbor.

It might be a tad too long, but better a bit longer than shorter, as a shorter spring is more powerful and might cause over-banking

Take the spring out and you'll know if there is a problem with it or not, otherwise your just guessing. Personally, I always change the mainspring for a new one, because if there is a problem with amplitude etc later down the line, you'll find your trying to diagnose a fault when it was staring you in the face all along, for the sake of spending a tenner on a new spring!

Also, you'll need an anti-clockwise mainspring winder to get the old spring back in, if you were to use the old spring and the most common mainspring winders are clockwise, so you might have problems there as well

Edited by Jon
Link to comment
Share on other sites
aac58 WRT Addict

aac58

Posted
Posted (edited)

This is a 7005 MS, it's the same as a 7009. It looks like yours.

7005-Main-Spring.jpg

In my opinion your spring is bent, so I don't think unwinding and rewinding it will correct it. But I don't know how much will that affect the performance of the watch.

Edited by aac58
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Murks
      Breguet hairspring frequency

      By Murks · Posted

      Hi can someone tell me where a can buy this chart for breguet hairspring frequency?
    • nevenbekriev
      Without Our Forum

      By nevenbekriev · Posted

      OK Rich, may be You are just a little bit more worried than really needed. Who am I to say, jus a newbie here but... Such a big forum will not collapse in any case, exept if the people loose their interest to participate. If something happens to the owner,  then senior members will be able to handle the forum. Let me show an example where one of the moderators of the russian forum (thow He was not russian), a man of great knowlage abd big heart, passed away in 2023. Thow His personal site is still working, the russians coppied the whole site to safe place here. I mean, all depends on the people and if they need to do something, they will find the way. Actually, the forum is place where people can meet and share. As a final measure, people can share their phone numbers and use Viber to comunicate, at least people who are interested to keep connection between each other.
    • thor447
      Case needed a lapping machine....So I improvised - Results are amateur but promising

      By thor447 · Posted

      Since I couldn't slow the machine down enough for my liking, I started off slowly with a higher grit.  I began (very lightly) with 1000 grit paper: https://www.amazon.com/gp/product/B07DTJBND1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Finished with 3000 grit: https://www.amazon.com/gp/product/B07DTFSMT1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Afterwards I went on to polish with traditional methods using felt & cotton wheels, with different grades of Dialux. Hope this helps.
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Ok so there is barely any response happening . After this last attempt i think I'm just going to give up on it because very few seem genuinely interested or even bothered or worried what may happen in the future. ( if someone can set me straight I'd love to hear it ) I would think anyone into watches has heard of Roland Ranfft, how they grew to love and depend upon his site for detailed information. And not just that, he also had a view about Ebay and everyone that visited Roland's site knew exactly what he thought about Ebay, Roland's site also had a secondhand watch sale side to it.  If anyone here could have done anything to preserve his site and keep it exactly the way it was.........Would you have done something to make that happen ?  Its been pointed out to me but not in so many words  that I'm probably coming across as an insensitive p.rick, truly I'm sorry about that, i say it as it is but no malice is intended and yes clearly I'm putting my forum membership on the line here. I'll happily shut up about it now, I've done all i can.
    • grenert
      A see-through vintage Swatch! Service walkthrough of a ETA 2842 with Video

      By grenert · Posted

      Thank you so much for posting this!  Although this movement is serviceable, there are no service notes that I've been able to find.  This is a great alternative!
×
×
  • Create New...