Jump to content

Mr

kfetz

By kfetz
in Watch Repairs Help & Advice

 Share

Recommended Posts

kfetz New Member

kfetz

Posted
Posted

I Have a beautiful watch that I purchased thru Tanga. It is a gold and black analog watch .. The watch band is tight .. I was wondering if you could send me two links with the pins so that I can make it looser. It keeps popping when I wear as it is tight on the wrist. Thank You .. I have had 4 of these watches .. the plastic bands break making them unusable .. but this seemed made better but it is tight. Thank You .. I love the watch .. 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • CYCLOPS
      Intro

      By CYCLOPS · Posted

      welcome, sounds like you are on your way so far, you also might be able to help with gold/plated case repair for some .....
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Yes, I was referring to the (jewelled) gear train with HP (most of the time, I use 1300, but when Rolex says 1000, I'll use 1000).
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      did I miss the update of the message of something changing?      
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
×
×
  • Create New...