ETA Part #8335 Operating Lever Spring Problem

[Folkvisor]

Hi

One of the bends in the Operating Lever Spring (8335) accommodated the Setting Lever (443/1) shaft but the spring should be able to fit under the Train Bridge (106); however, the bend in the Operating Lever Spring sticks out from under the Train Bridge where it should be snugged agains the Setting Lever shaft. 

I have checked for foreign objects and found none. The spring is in the right way and I am quite sure it fit before. Also, there should be nothing in the openings under the Train Bridge to obstruct the spring as it moves back and forth easily. It just won't got under the Train Bridge and snug up against the Setting Lever shaft.

Any ideas?

Dave 

[rogart63]

Which movement? 

[Folkvisor]

O, sorry...7751 Moonphase.

[Folkvisor]

I think that the spring will be pushed into place when the Operating Lever and Reset Lever are used. It is sticking out a very small amount from beneath the Train Bridge. If it proves to be a problem, I'll just get more practice disassembling and reassembling the movement.