Jump to content

Ulysse nardin dual time executive

Tiago

By Tiago
in Watch Repairs Help & Advice

 Share

Recommended Posts

Tiago New Member

Tiago

Posted
Posted

Need to replace the dial but not sure if the movement is meant to be removed from the front the case?? Because the dial is way big to be removed through the back. plus this is a ceramic bezel.. dont wanna wreak it!! 

Thanx

15319384564941620640907.jpg

1531938492700659675094.jpg

Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted
1 hour ago, Tiago said:

dont wanna wreak it!! 

Then leave it alone, no doubt U/N would want silly money for one if you did, these watches retail at $8,000, the problem with these fancy ceramic materials is that they are very brittle and easy to break, is this watch a repair for a customer or yourself, sometimes its just best to walk away from such watches and let it be someone else headache.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      The best and almost only way to achieve the magical £ 4.04 individual watch cost is via the loophole ploy of job lot buys Ross. Dividing down the outlay by the number of watches purchased. I've managed it many times in the past, this then gives you the extra edge of choosing any watch from that lot. Maybe we should have an all time winner, whos prepared to troll  through the last four years of posts and pick some worthy contenders. Unfortunately i have a poorly shoulder so i cant raise my right hand and my left shoulder is out in sympathy for my right shoulder. Put your right hand up if you think i talk a load of bull 💩     🖐
    • rossjackson01
      404 Club Reboot

      By rossjackson01 · Posted

      Ah but, will you count DIY versions.
    • tomh207
      404 Club Reboot

      By tomh207 · Posted

      £10.00 is not a huge amount for a watch these days with the increased asking prices. Let’s count ourselves lucky we don’t have this for tools, it would be £404.00 🤪   Tom
    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      I have the perfect solution for this, i just dont invite anyone round.
    • Waggy
      404 Club Reboot

      By Waggy · Posted

      @rossjackson01 it's only getting harder and harder to get 'cheap' watches to work on, I have done some reading and depending on the source the prices of vintage watches is increasing somewhere between 10% and 50% a year. The only way I have found to get watches to lay the 404 game with is to buy a bulk lot say 10 with an average price of < £4.04 but even that is getting harder and harder, hence the re-boot. I see that £6.99 is looking like a popular choice - but I ask the members, is £6.99 realistic, can you actually find watches to work on for £6.99 - maybe its better to cut to the chase and jump to £10.10 for example and allow more people to play? Jut a thought.
×
×
  • Create New...