Jump to content

looking for smith in NW Oregon

NotintoHorology
 Share

Recommended Posts

NotintoHorology New Member

NotintoHorology

Posted
Posted

looking for a Smith in NW. Oregon . Did not know ? . if your website has a geographical list of Site-members listed, of qualified service and repair  ?

Someone local if possible for straight forward service/repair . 1941, Raymond Elgin, Pocket/open face / railroad grade .
Just need crystal replacement looks to be around a 60mm . did have a balance wheel cut and replaced years back and watch is working order and keeps time . one of Elgin open-face models that you unscrew bezel and then pull lever hidden under bezel edge to set, was also set-up with 24-hour wind spring .
not looking for 3rd party, someone to give watch to, and then that person send out of state . but find someone in-state if possible .

If can help with info, just give me a PM here on the site, and I think I will get a message notification on my email address I provided in log-in info . or email if my personal info shows my email contact . And I will also log-in a few days to check if anyone has info .

....thanks
.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Yep Mike , i use exactly the same gauge for it.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      You definitely pick up different names from different people of all ages from everywhere. Like learning different dialects of the same language. Its all part of the learning curve of any trade.  Both those two terms describe to me perfectly that they are one and the same. After a couple of years of knowledge you can figure out what is being talked about. There are times that i get caught out with something i haven't encountered before. 
×
×
  • Create New...